3D-printen: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 1: Regel 1:
 
[[Categorie:Tool]][[Categorie:Manual]][[Categorie:Docu]][[Categorie:CNC]]
 
[[Categorie:Tool]][[Categorie:Manual]][[Categorie:Docu]][[Categorie:CNC]]
  
De makerspace heeft meerdere 3d printers, 3 Mendel90's en een Ultimaker2.
+
De makerspace heeft two Ultimaker 2 en een Ultimaker 2 Extended +
  
 
[[category:Zandbak]][[Category:CNC]][[Category:SafetySheet]][[Category:Tool]][[Category:Manual]][[Category:Notes]]
 
[[category:Zandbak]][[Category:CNC]][[Category:SafetySheet]][[Category:Tool]][[Category:Manual]][[Category:Notes]]
 
{{SafetyCat3}}
 
{{SafetyCat3}}
 
  
 
This equipment is safety category 3:
 
This equipment is safety category 3:
Regel 17: Regel 16:
 
* Make sure you read the Wiki before asking.
 
* Make sure you read the Wiki before asking.
 
   
 
   
 
 
 
{{NoiseCat3}}
 
{{NoiseCat3}}
  
Regel 25: Regel 22:
  
 
{{OwnCat1|thing=Ultimaker}}
 
{{OwnCat1|thing=Ultimaker}}
 
 
 
 
  
 
==3D Printing==
 
==3D Printing==

Versie van 11 jun 2020 om 19:39


De makerspace heeft two Ultimaker 2 en een Ultimaker 2 Extended +

This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.

This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.


This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.

This equipment is Noise Category 3: Can be used at all hours. No limits.


This equipment is Noise Category 3: Can be used at all hours. No limits.

Sjabloon:OwnCat1

3D Printing

Software

For the design of 3D models, the following software can be used:

  • Open scad - Openscad is a open source software for creating solid 3D Cad objects (available on Wndows, MacOS and Unix/Linux). Openscad is a scripting language
  • Fusion 360 Fusion 360 is an integrated CAD/CAM/CAE software to design 3D models. For personal use it is free of charge (available on Windows, MacOS)
  • Tinkercad Tinkercad is a free, easy-to-use app for 3D design, electronics, and coding.

For the printing of the models , the printer needs a .STL file. Any CAD software that is able to convert your design into a STL is suitable for designing for the 3D printers. Alternatives are Sketch and Blender.

The printer needs a GCODE file as input. A .STL file can be converted into a GCODE by:

  • Cura Cura is used to slice the model and prepare the GCODE (file extension .NGO). To feed model the GCODE needs to be copied to a SD-card. The SD-card reader is on the front of the 3D printer
  • Slic3r Slic3r is used to slice the model and prepare the GCODE. To feed model the GCODE (file extension .NGO) needs to be copied to a SD-card. The SD-card reader is on the front of the 3D printer
  • PrintRun PrintRun allows direct control of the printer and offer more opportunities than Cura/Slic3r. The GCODE file is uploaded via the USB connection on th ebackside of the printer.

Ultimaker printers

The Makerspace has two near identical 3D printers: