3D-printen: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 9: Regel 9:
 
* [https://www.autodesk.com/products/fusion-360/overview Fusion 360] Fusion 360 is an integrated CAD/CAM/CAE software to design 3D models. For personal use it is free of charge (available on Windows, MacOS)
 
* [https://www.autodesk.com/products/fusion-360/overview Fusion 360] Fusion 360 is an integrated CAD/CAM/CAE software to design 3D models. For personal use it is free of charge (available on Windows, MacOS)
 
* [https://www.tinkercad.com Tinkercad] Tinkercad is a free, easy-to-use app for 3D design, electronics, and coding.
 
* [https://www.tinkercad.com Tinkercad] Tinkercad is a free, easy-to-use app for 3D design, electronics, and coding.
 +
  
 
For the printing of the models , the printer needs a .STL file. Any CAD software that is able to convert your design into a STL is suitable for designing for the 3D printers. Alternatives are [https://www.sketch.com/ Sketch] and [https://www.blender.org Blender].
 
For the printing of the models , the printer needs a .STL file. Any CAD software that is able to convert your design into a STL is suitable for designing for the 3D printers. Alternatives are [https://www.sketch.com/ Sketch] and [https://www.blender.org Blender].
 +
  
 
The printer needs a GCODE file as input. A .STL file can be converted into a GCODE by:
 
The printer needs a GCODE file as input. A .STL file can be converted into a GCODE by:
Regel 16: Regel 18:
 
* [http://slic3r.org/ Slic3r] Slic3r is used to slice the model and prepare the GCODE. To feed model the GCODE (file extension .NGO) needs to be copied to a SD-card. The SD-card reader is on the front of the 3D printer
 
* [http://slic3r.org/ Slic3r] Slic3r is used to slice the model and prepare the GCODE. To feed model the GCODE (file extension .NGO) needs to be copied to a SD-card. The SD-card reader is on the front of the 3D printer
 
* [https://github.com/kliment/PrintRun PrintRun] PrintRun allows direct control of the printer and offer more opportunities than Cura/Slic3r. The GCODE  file is uploaded via the USB connection on th ebackside of the printer.
 
* [https://github.com/kliment/PrintRun PrintRun] PrintRun allows direct control of the printer and offer more opportunities than Cura/Slic3r. The GCODE  file is uploaded via the USB connection on th ebackside of the printer.
 +
  
 
==Ultimaker printers==
 
==Ultimaker printers==
 
The Makerspace has two near identical 3D printers:
 
The Makerspace has two near identical 3D printers:
* [https://wiki.makerspaceleiden.nl/mediawiki/index.php/Ultimaker2 Ultimaker 2+]<br />
+
* [https://wiki.makerspaceleiden.nl/mediawiki/index.php/Ultimaker2 Ultimaker 2+]<br />
* [https://wiki.makerspaceleiden.nl/mediawiki/index.php/Ultimaker2 Ultimaker Extended 2+]<br />
+
* [https://wiki.makerspaceleiden.nl/mediawiki/index.php/Ultimaker2 Ultimaker Extended 2+]<br />
 
 
[[Categorie:Manual]][[Categorie:Tool]][[Categorie:Notes]][[Categorie:CNC]]
 

Versie van 15 jun 2020 om 09:36

This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.

This equipment is Noise Category 3: Can be used at all hours. No limits.

3D Printing

Software

For the design of 3D models, the following software can be used:

  • Open scad - Openscad is a open source software for creating solid 3D Cad objects (available on Wndows, MacOS and Unix/Linux). Openscad is a scripting language
  • Fusion 360 Fusion 360 is an integrated CAD/CAM/CAE software to design 3D models. For personal use it is free of charge (available on Windows, MacOS)
  • Tinkercad Tinkercad is a free, easy-to-use app for 3D design, electronics, and coding.


For the printing of the models , the printer needs a .STL file. Any CAD software that is able to convert your design into a STL is suitable for designing for the 3D printers. Alternatives are Sketch and Blender.


The printer needs a GCODE file as input. A .STL file can be converted into a GCODE by:

  • Cura Cura is used to slice the model and prepare the GCODE (file extension .NGO). To feed model the GCODE needs to be copied to a SD-card. The SD-card reader is on the front of the 3D printer
  • Slic3r Slic3r is used to slice the model and prepare the GCODE. To feed model the GCODE (file extension .NGO) needs to be copied to a SD-card. The SD-card reader is on the front of the 3D printer
  • PrintRun PrintRun allows direct control of the printer and offer more opportunities than Cura/Slic3r. The GCODE file is uploaded via the USB connection on th ebackside of the printer.


Ultimaker printers

The Makerspace has two near identical 3D printers: