ER 25/32/40 Collets and holders: verschil tussen versies
(Nieuwe pagina aangemaakt met 'Category:ToolCategory:MetalCategory:SafetySheet {{SafetyCat3}} {{NoiseCat3}} miniatuur|ER25 metric collet set Set of METRIC colle...') |
|||
| Regel 7: | Regel 7: | ||
Set of METRIC collets -- for the ER25 holder of the Abene, Metal Lathe and Wood Lathe. Sizes 1mm - 16mm -- and each will take 1mm smaller. So actual range is 0 to 16mm. Do not use them outside this range. They will break (check the box with the boring bar for examples). | Set of METRIC collets -- for the ER25 holder of the Abene, Metal Lathe and Wood Lathe. Sizes 1mm - 16mm -- and each will take 1mm smaller. So actual range is 0 to 16mm. Do not use them outside this range. They will break (check the box with the boring bar for examples). | ||
| − | Make sure you `angle-click' the collet into the nut (do not force it straight). | + | Make sure you `angle-click' the collet into the nut (do not force it straight). Have someone show you if you've not done it before -- as it is easy to get them out of shape this way -- causing vibration. |
== History == | == History == | ||
Bought June 2019. | Bought June 2019. | ||
Versie van 4 jun 2019 om 14:16
This equipment is safety category 3:
- Mandatory, in person, instructions.
- Make sure you read the Wiki before asking.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Bestand:Er25-set
ER25 metric collet set
Set of METRIC collets -- for the ER25 holder of the Abene, Metal Lathe and Wood Lathe. Sizes 1mm - 16mm -- and each will take 1mm smaller. So actual range is 0 to 16mm. Do not use them outside this range. They will break (check the box with the boring bar for examples).
Make sure you `angle-click' the collet into the nut (do not force it straight). Have someone show you if you've not done it before -- as it is easy to get them out of shape this way -- causing vibration.
History
Bought June 2019.
