ER 25/32/40 Collets and holders: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 3: Regel 3:
 
[[Bestand:Er25-set.jpeg|miniatuur|ER25 metric collet set]]
 
[[Bestand:Er25-set.jpeg|miniatuur|ER25 metric collet set]]
  
Set of METRIC collets -- for the ER25 holder of the Abene, Metal Lathe and Wood Lathe. Sizes 1mm - 16mm -- and each will take 1mm smaller. So actual range is 0 to 16mm. Do not use them outside this range. They will break (check the box with the boring bar for examples).
+
Set of METRIC collets -- for the ER25 holder of the[[Abene VHF3 Metaalfrees machine]], [[Metaaldraaibank|Metal lathe]],[[Houtdraaibank|Wood Lathe]] and various other MT2 taper tools/
 +
 
 +
Sizes 1mm - 16mm -- and each will take 1mm smaller. So actual range is 0 to 16mm. Do not use them outside this range. They will break (check the box with the boring bar for examples).
  
 
Make sure you `angle-click' the collet into the nut (do not force it straight). Have someone show you if you've not done it before -- as it is easy to get them out of shape this way -- causing vibration.
 
Make sure you `angle-click' the collet into the nut (do not force it straight). Have someone show you if you've not done it before -- as it is easy to get them out of shape this way -- causing vibration.

Versie van 4 jun 2019 om 13:19


ER25 metric collet set

Set of METRIC collets -- for the ER25 holder of theAbene VHF3 Metaalfrees machine, Metal lathe,Wood Lathe and various other MT2 taper tools/

Sizes 1mm - 16mm -- and each will take 1mm smaller. So actual range is 0 to 16mm. Do not use them outside this range. They will break (check the box with the boring bar for examples).

Make sure you `angle-click' the collet into the nut (do not force it straight). Have someone show you if you've not done it before -- as it is easy to get them out of shape this way -- causing vibration.

History

Bought June 2019.

Rules

This equipment is safety category 5: Equipment that is relatively fragile or expensive

  • In person instructions is not mandatory.
  • Reading the wiki, and following the instructions, is mandatory.

This equipment is Noise Category 3: Can be used at all hours. No limits.