Grote Gaten Zaag - Large Hole Saw: verschil tussen versies
(→Ownership) |
(→Location) |
||
| Regel 8: | Regel 8: | ||
See also the [[HSS Drills]] and [[Wood Drills]] for general purpose drilling and [[Spade drills]] for larger holes. | See also the [[HSS Drills]] and [[Wood Drills]] for general purpose drilling and [[Spade drills]] for larger holes. | ||
| + | |||
| + | == Speed == | ||
| + | |||
| + | [[Bestand:Saw-speed-table.png|miniatuur|typical speeds for larger sizes]] | ||
== Location == | == Location == | ||
Usually above the wood-workbench on the side of the pillar dril/mitre saw. | Usually above the wood-workbench on the side of the pillar dril/mitre saw. | ||
| − | + | ||
== Maintenance / Replacing == | == Maintenance / Replacing == | ||
Versie van 12 nov 2019 om 11:24
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
There are is a set of large hole saws in the workshop.
See also the HSS Drills and Wood Drills for general purpose drilling and Spade drills for larger holes.
Speed
Location
Usually above the wood-workbench on the side of the pillar dril/mitre saw.
Maintenance / Replacing
These tools will wear out - and the space will replace them.
Ask on the mailing lists to get them ordered.
Ownership & History
Owned by the space. Current set bought Q2 2019.
The doorn and the 44mm saw where replaced 2019-11-12; as they broke. Metal fatique.
