Grote Gaten Zaag - Large Hole Saw

Uit MakerSpace Leiden
Versie door DirkWillem (overleg | bijdragen) op 12 nov 2019 om 11:38 (Ownership & History)
Ga naar: navigatie, zoeken

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

There are is a set of large hole saws in the workshop.

Largeholesaw.jpg
Largeholesaw-box.jpg

See also the HSS Drills and Wood Drills for general purpose drilling and Spade drills for larger holes.

Speed

typical speeds for larger sizes

Location

Usually above the wood-workbench on the side of the pillar dril/mitre saw.

Maintenance / Replacing

These tools will wear out - and the space will replace them.

Ask on the mailing lists to get them ordered.

Ownership & History

Owned by the space. Current set bought early May 2019.

The doorn and the 44mm saw where replaced 2019-11-12; as they broke. Metal fatique.