Hand Router / Bovenfrees: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 1: Regel 1:
[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat2}}{{DustControl3}}[[Category:OnLoan]]
+
[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat2}}{{DustControl3}}[[Category:OnLoan]][[Categorie:Imperial]]
 
[[Bestand:frezen1.jpeg|miniatuur]]
 
[[Bestand:frezen1.jpeg|miniatuur]]
 
[[Bestand:frezen2.jpeg|miniatuur]]
 
[[Bestand:frezen2.jpeg|miniatuur]]

Versie van 24 mei 2019 om 10:59

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.

This equipment is ought to be used with active dust control if you use it for more than 10-15 minutes in total.

Frezen1.jpeg
Frezen2.jpeg

Electric hand router. We have several ones; from very light to quite heavy as well as a Router Table.

Be very careful with the collet sizes; we have both Imperial and Metric ones; in 1/4th of an inch; 6mm and 8mm.

Know that 1/4 of an inch is almost 6mm - but not quite. Putting a 6mm bit into a 1/4th of an inch collet or vise versa will absolotely ruin it. And they are expensive and hard to replace (long lead team; 30-60 euro's).

So check that your cutter shank fits absolutely perfectly in the collet; with virtually no wobble even when not yet tightened.

Ownership

The Green Bosch POF 1400 ACE is owned by Ramon, it is labeled. See Category:OnLoan.

Een Groene Bosch bovenfrees is van Ronald.Category:OnLoan.

Een Groene Bosch bovenfrees is van Alex. Category:OnLoan.

The light blue one has been donated to the space by Dirk.