Hexes (Inbus, zeskantig) -- Metric and Imperial: verschil tussen versies
k (DirkWillem heeft pagina Imperial-Hexes hernoemd naar Hexes (Inbus, zeskantig) -- Metric and Imperial) |
|||
| Regel 1: | Regel 1: | ||
| − | [[Categorie:Tool]][[Categorie:Metal | + | [[Categorie:Tool]][[Categorie:Metal]] |
{{SafetyCat6}}{{NoiseCat3}} | {{SafetyCat6}}{{NoiseCat3}} | ||
| Regel 21: | Regel 21: | ||
Todo: photograph the other ones. | Todo: photograph the other ones. | ||
| − | + | {{Sjabloon:Imperial}} | |
Huidige versie van 24 mei 2019 om 14:44
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Owned by the space (mid 2019 for imperial sized ones).
Types:
| Color | What is it |
|---|---|
| Red with black holder | Imperial hexes |
| Silver | Metrix hexes |
| Black with red holder | Metrix hexes that are `slagvast' -- i.e .you can use a hammer on these. |
Todo: photograph the other ones.
WARNING: Imperial tools have slightly different sizes than Metric ones.
Using the wrong one will often damage the bolt, nut or whatever you are working on. See this list for all the imperial tools we have.
Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.
Be especially careful with the close friends, such as sizes like 5/8inch and 16mm;
although the difference is 0.13mm - you will ruin (or usually just crack) a collet or similar..
