ToDo: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Blue Laser engraver/cutter)
 
(56 tussenliggende versies door 6 gebruikers niet weergegeven)
Regel 1: Regel 1:
 +
[[Category:Algemeen]]
 +
 +
 
We maintain the space collectively - as an all volunteer effort.
 
We maintain the space collectively - as an all volunteer effort.
  
== Physical things ==
+
==recurring==
 +
 
 +
* vacuüm small room
 +
* And maybe the larger one too (or use a broom)
 +
* Dishes
 +
* clean kitchen
 +
* clean toilet
 +
* Clean and reoil the various metal working machines - including a thin coat of slideways-oil / lijbaan olie on the gangways/slides/lijbanen.
 +
* Return misplaced tools to where they belong.
 +
* Specialist: clean LaserSaur (& Red&Blue engravers) Mirrors
 +
* Clean lasersaur bed
 +
* Clean air filter
 +
 
 +
Tasks that the CRM will email about:
 +
 
 +
* put bin out on the right day - volunteer in CRM
 +
* Check compressors (Water seperators and condensation outlet)- volunteer in CRM
 +
* Check drillbits (3x) and replenish from the green storage/bulk box - volunteer in CRM
 +
* Refill the various [[SnijOlie BoorOlie CuttingOil]] bottles - volunteer in CRM
 +
 
 +
==Physical things==
 +
===Small jobs===
 +
 
 +
* Vaccuum-clean small room.
 +
* Sort Plastic Stash under lasersaurus: Un-laserable PolyCarbonate is now mixed in with the laserable Acrylic. Move un-laserable PC (To where? Algemene voorraadkast? Lasersaurkast because it is what the saur is made of? Something Frees-ish because usable with frees?)
 +
* Inkorten alle zwarte slangen perslucht (Alex/Jan zijn slangpilaartjes aan het bestellen,
  
 
===New dust control for the wood workshop: [[Succobus]]===
 
===New dust control for the wood workshop: [[Succobus]]===
 
* Tubing:
 
* Tubing:
** <strike>Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length. </strike> Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
+
** <s>Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length. </s> Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
 +
 
 
* Electrics:
 
* Electrics:
 
** Feed the bare-copper wire through all the tubes -- to stop static dust collection.
 
** Feed the bare-copper wire through all the tubes -- to stop static dust collection.
  
=== red laser engraver/cutter ===
+
===Blue Laser engraver/cutter===
* put config file on github
+
* Is defect, moet worden gerepareerd. Mogelijk voeding.
* update wiki with new visicut
 
  
=== Blue Laser engraver/cutter ===
+
===Saurus===
* Specialist work. Don' t undertake unless comfortable and capable. See [[Blue_laser_engraver]]
 
** correct fan wire in power supply contacting fan blades making noise
 
** Check focus and mirrors (Since it engraves less well then the red one, currently).
 
** <s> '''Outlets on the back are non-grounded and don' t work well (Pump gets no power sometimers, lasercutter resets once it does). So TODO: replace those "universal" outlets with normal european outlets and connect ground wire. '''</s>
 
  
* non-dangerous work:
+
* Side panel for electronics is missing, they now get dusty. Clean & replace.
** update [[Blue_laser_engraver]] (Add a picture)
+
* Recurring: Cleaning. Cleaning mirrors is specialist work.
** Honingraatbed?
 
** <s>Top-up the cooling water (with demineralized 'laser' water with a drop of the 'no-green-stuff--stuff')</s>
 
** <s>Put config files on github </s>(Also for the red one, and maybe compare them?)
 
  
=== lights ===
+
===Wiring===
* Hang the warmer lights in the small room (preferably before Hans returns! as he donated them.)
+
* Wire the lamp above the metal work table to the TL lights in the ceiling.
** We might need to get cable etc. first
+
* Find higher power tubes that do not flicker for that fitting.
  
=== Wiring ===
+
===Network===
 +
<s># Remove all VLANs and flatten the network to one.</s>
 +
# Update docs how how we did the firewall, etc. -- see [[2020 grote opruiming netwerk]]
  
* Affix the dangling small 2 port junction box to the concrete slab above the space door. Plug's are in a box labeled thus in the green cabinet; the big green metabo drill in the woodshop can be set to hammering.
+
===Metaal werkplaats===
 +
<s># werktafel aan vloer zetten</s>
 +
# 4x L Beugeltjes maken om de poten van de werktafel beter aan de 4 keilbouten vast te zetten
  
=== recurring ===
+
==Documentation things==
* vacuüm small room
 
* And maybe the larger one too (or use a broom)
 
* Dishes
 
* clean kitchen
 
* clean toilet
 
* put bin out on the right day - volunteer in CRM
 
* Check the various boxes with drills and replace them from the supply.
 
* Clean and reoil the various metal working machines - including a thin coat of slideways-oil / lijbaan olie on the gangways/slides/lijbanen.
 
* Return misplaced tools to where they belong.
 
  
== Documentation things ==
 
 
* Update the wiki to describe the second garbage bin processes.
 
* Update the wiki to describe the second garbage bin processes.
* We have quite a few [[:Categorie:Tool|Tools]] without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
+
* We have quite a few [[:Categorie:Tool|Tools]] without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
 
* Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.
 
* Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.
 +
* put config files for the laos lasercutters on github
 +
* update wiki with new visicut
  
== Cyber Things ==
+
==Cyber Things==
  
 
* Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
 
* Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
Regel 55: Regel 72:
 
* See if we can do post-by-email or simpler for wordpress.
 
* See if we can do post-by-email or simpler for wordpress.
  
== repairs ==
+
==repairs==
 +
 
 +
 
 +
 
 +
===floor===
  
=== floor ===
 
 
* fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)
 
* fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)
* procure/find/ask shops for scraps a piece of linoleum for the small room. Same thickness, any color. About .. cm wide / .. m long. Or smaller pieces that add up. Also glue and filament (for the seams).
 
** put it all in place, fixing the "gutter" in front of E-table.
 
  
=== electric ===
+
===electric===
* There is one outlet left of the abene that does not work, possibly a loose wire?
+
 
* We 're out of 12V halogen bulbs for the small desklights (But the white/translucent one has had it's bulb replaced with the last spare)
+
* <s>There is one outlet left of the abene that does not work, possibly a loose wire?</s> Fixed. But can be pulled out of the wall with the plug. That' s left for someone else to fix.

Huidige versie van 28 dec 2023 om 17:07


We maintain the space collectively - as an all volunteer effort.

recurring

  • vacuüm small room
  • And maybe the larger one too (or use a broom)
  • Dishes
  • clean kitchen
  • clean toilet
  • Clean and reoil the various metal working machines - including a thin coat of slideways-oil / lijbaan olie on the gangways/slides/lijbanen.
  • Return misplaced tools to where they belong.
  • Specialist: clean LaserSaur (& Red&Blue engravers) Mirrors
  • Clean lasersaur bed
  • Clean air filter

Tasks that the CRM will email about:

  • put bin out on the right day - volunteer in CRM
  • Check compressors (Water seperators and condensation outlet)- volunteer in CRM
  • Check drillbits (3x) and replenish from the green storage/bulk box - volunteer in CRM
  • Refill the various SnijOlie BoorOlie CuttingOil bottles - volunteer in CRM

Physical things

Small jobs

  • Vaccuum-clean small room.
  • Sort Plastic Stash under lasersaurus: Un-laserable PolyCarbonate is now mixed in with the laserable Acrylic. Move un-laserable PC (To where? Algemene voorraadkast? Lasersaurkast because it is what the saur is made of? Something Frees-ish because usable with frees?)
  • Inkorten alle zwarte slangen perslucht (Alex/Jan zijn slangpilaartjes aan het bestellen,

New dust control for the wood workshop: Succobus

  • Tubing:
    • Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length. Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
  • Electrics:
    • Feed the bare-copper wire through all the tubes -- to stop static dust collection.

Blue Laser engraver/cutter

  • Is defect, moet worden gerepareerd. Mogelijk voeding.

Saurus

  • Side panel for electronics is missing, they now get dusty. Clean & replace.
  • Recurring: Cleaning. Cleaning mirrors is specialist work.

Wiring

  • Wire the lamp above the metal work table to the TL lights in the ceiling.
  • Find higher power tubes that do not flicker for that fitting.

Network

# Remove all VLANs and flatten the network to one.

  1. Update docs how how we did the firewall, etc. -- see 2020 grote opruiming netwerk

Metaal werkplaats

# werktafel aan vloer zetten

  1. 4x L Beugeltjes maken om de poten van de werktafel beter aan de 4 keilbouten vast te zetten

Documentation things

  • Update the wiki to describe the second garbage bin processes.
  • We have quite a few Tools without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
  • Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.
  • put config files for the laos lasercutters on github
  • update wiki with new visicut

Cyber Things

  • Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
  • Find and install crosspost module on wordpress to twitter/facebook.
  • See if we can do post-by-email or simpler for wordpress.

repairs

floor

  • fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)

electric

  • There is one outlet left of the abene that does not work, possibly a loose wire? Fixed. But can be pulled out of the wall with the plug. That' s left for someone else to fix.