ToDo: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Physical things)
Regel 14: Regel 14:
  
 
=== red laser engraver/cutter ===
 
=== red laser engraver/cutter ===
* Might need maintainance / cleaning (dust. Mirrors and lens are clean, but everything else is dusty), but should be usable
 
 
* put config file on github
 
* put config file on github
 
* update wiki with new visicut
 
* update wiki with new visicut

Versie van 21 jun 2019 om 10:20

We maintain the space collectively - as an all volunteer effort.

Physical things

  • Make a good photo of the first aid box -in-situ- that shows clearly where it is; and put it on FirstAid EHBO Doos
  • Make good photos of the fire-extinguishers; -in-situ- that shows clearly where they are and put on Fireextingishers including expiry dates.


New dust control for the wood workshop: Succobus

  • Tubing:
    • Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length. Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
  • Electrics:
    • Feed the bare-copper wire through all the tubes -- to stop static dust collection.

red laser engraver/cutter

  • put config file on github
  • update wiki with new visicut

Blue Laser engraver/cutter

  • Specialist work. Don' t undertake unless comfortable and capable. See Blue_laser_engraver
    • correct fan wire in power supply contacting fan blades making noise
  • non-dangerous work:
    • update Blue_laser_engraver (Add a picture)
    • Honingraatbed?
    • Top-up the cooling water (with demineralized 'laser' water with a drop of the 'no-green-stuff--stuff')
    • improve network connection (Already on NetworkSetup#IP but machine itself needs to be configured accordingly. Currently it has a set IP and no DHCP, new config should be DHCP and it will get a static IP)
    • Wire the OTHER end of the network to the patchkast. See 'wiring'
    • Put config files on github (Also for the red one, and maybe compare them?)

lights

  • Hang the warmer lights in the small room (preferably before Hans returns! as he donated them.)
    • We might need to get cable etc. first

Wiring

  • Affix the dangling small 2 port junction box to the concrete slab above the space door. Plug's are in a box labeled thus in the green cabinet; the big green metabo drill in the woodshop can be set to hammering.
  • Various network boxes have not yet been connected at the Patchkast. Among them the 2nd box (lower one) near the laser cutters, possibly the one near the CNC, and probably others: there is a bundle of at least 8 unconnected cables at the patchkast.

recurring

  • vacuüm small room
  • And maybe the larger one too (or use a broom)
  • Dishes
  • clean kitchen
  • clean toilet
  • put bin out on the right day - volunteer in CRM

Documentation things

  • Update the wiki to describe the second garbage bin processes.
  • We have quite a few Tools without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
  • Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.

Cyber Things

  • Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
  • Find and install crosspost module on wordpress to twitter/facebook.
  • See if we can do post-by-email or simpler for wordpress.

repairs

floor

  • fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)
  • procure/find/ask shops for scraps a piece of linoleum for the small room. Same thickness, any color. About .. cm wide / .. m long. Or smaller pieces that add up. Also glue and filament (for the seams).
    • put it all in place, fixing the "gutter" in front of E-table.

electric

  • There is one outlet left of the abene that does not work, possibly a loose wire?
  • We 're out of 12V halogen bulbs for the small desklights (But the white/translucent one has had it's bulb replaced with the last spare)