ToDo: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Wiring)
(electric: Left outlet next to abene fixed)
Regel 81: Regel 81:
  
 
=== electric ===
 
=== electric ===
* There is one outlet left of the abene that does not work, possibly a loose wire?
+
* <s>There is one outlet left of the abene that does not work, possibly a loose wire?</s> Fixed. But can be pulled out of the wall with the plug. That' s left for someone else to fix.
 
* We 're out of 12V halogen bulbs for the small desklights (But the white/translucent one has had it's bulb replaced with the last spare)
 
* We 're out of 12V halogen bulbs for the small desklights (But the white/translucent one has had it's bulb replaced with the last spare)

Versie van 17 jan 2020 om 15:15

We maintain the space collectively - as an all volunteer effort.

recurring

  • vacuüm small room
  • And maybe the larger one too (or use a broom)
  • Dishes
  • clean kitchen
  • clean toilet
  • Clean and reoil the various metal working machines - including a thin coat of slideways-oil / lijbaan olie on the gangways/slides/lijbanen.
  • Return misplaced tools to where they belong.
  • Specialist: clean LaserSaur (& Red&Blue engravers) Mirrors
  • Clean lasersaur bed
  • Clean air filter

Tasks that the CRM will email about:

  • put bin out on the right day - volunteer in CRM
  • Check compressors (Water seperators and condensation outlet)- volunteer in CRM
  • Check drillbits (3x) and replenish from the green storage/bulk box - volunteer in CRM
  • Refill the various SnijOlie BoorOlie CuttingOil bottles - volunteer in CRM

Physical things

Small jobs

  • Vaccuum-clean small room.
  • Sort Plastic Stash under lasersaurus: Un-laserable PolyCarbonate is now mixed in with the laserable Acrylic. Move un-laserable PC (To where? Algemene voorraadkast? Lasersaurkast because it is what the saur is made of? Something Frees-ish because usable with frees?)

New dust control for the wood workshop: Succobus

  • add a polycarbonate window.
  • Tubing:
    • Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length. Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
  • Electrics:
    • Feed the bare-copper wire through all the tubes -- to stop static dust collection.

Blue Laser engraver/cutter

* 12v waterpompje (voeding nodig)

  • Knopje van joystick weer weghalen, want het maakt de navigatie onhandiger

Saurus

  • Side panel for electronics is missing, they now get dusty. Clean & replace.
  • First mirror cleaned -- Lucas (overleg) 21 dec 2019 17:49 (CET)
  • bed leveled -- Lucas (overleg) 21 dec 2019 17:49 (CET)

all the lasercutters

* PID controll for water heater. We have multiple PID controllers in the recycle cabinet, if these are put in a nice housing they can control the heaters for the lasercutters (Water needs to be above .. C before cutting, in winter this is a problem).

Wiring

  • Affix the dangling small 2 port junction box to the concrete slab above the space door. Plug's are in a box labeled thus in the green cabinet; the big green metabo drill in the woodshop can be set to hammering.
  • Feed the ethernet cable that is coiled up near the electronics desk with a bit of blue tape through the white duct on the wall until it is near the 3D printers/Scanners. And make a wall sockets. So we can plug in the mac-mini, etc.
  • Punch the other end of above cable at the patch panel end (Henk, DW and Lucas can show you how).

Server closet

  1. Put up the much nicer 19" power socket bars; and reroute all power.
  2. Clean the whole thing.

Network

  1. Remove all VLANs and flatten the network to one.

Documentation things

  • Update the wiki to describe the second garbage bin processes.
  • We have quite a few Tools without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
  • Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.
  • put config files for the laos lasercutters on github
  • update wiki with new visicut

Cyber Things

  • Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
  • Find and install crosspost module on wordpress to twitter/facebook.
  • See if we can do post-by-email or simpler for wordpress.

repairs

  • Compressor for lasersaur: front motor's vent does not shut when powered, keeps venting. Also it is missing its dustcap.

floor

  • fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)
  • procure/find/ask shops for scraps a piece of linoleum for the small room. Same thickness, any color. About .. cm wide / .. m long. Or smaller pieces that add up. Also glue and filament (for the seams).
    • put it all in place, fixing the "gutter" in front of E-table.

electric

  • There is one outlet left of the abene that does not work, possibly a loose wire? Fixed. But can be pulled out of the wall with the plug. That' s left for someone else to fix.
  • We 're out of 12V halogen bulbs for the small desklights (But the white/translucent one has had it's bulb replaced with the last spare)