Toolmakers Clamp: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Use)
Regel 3: Regel 3:
 
{{NoiseCat3}}
 
{{NoiseCat3}}
  
Location: Metaalwerkplaats - on the white board on the wall.
+
Location: Metaalwerkplaats - top shelf of the blue cabinet.
  
 
We have 3 pairs of toolmakers clamps (machinist clamps) in the sizes small/50mm, medium/75mm and large/125mm (two each).
 
We have 3 pairs of toolmakers clamps (machinist clamps) in the sizes small/50mm, medium/75mm and large/125mm (two each).

Versie van 21 nov 2019 om 20:42

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Location: Metaalwerkplaats - top shelf of the blue cabinet.

We have 3 pairs of toolmakers clamps (machinist clamps) in the sizes small/50mm, medium/75mm and large/125mm (two each).

They help you clamp things safely; e.g. in the donkeysaw, the abene and on the big drill/router-pillar.

Use

Consult the internets (youtube) for a video. E.g. https://www.youtube.com/watch?v=ZhCEej-RLd4 , http://www.homews.co.uk/page267.html

and https://www.wonkeedonkeetools.co.uk/toolmakers-clamps/how-to-use-a-toolmaker-s-clamp

Ownership and History =

Bought by the makerspace in November 2019