TransferPunch OverbrengStempel: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Nieuwe pagina aangemaakt met 'Categorie:ToolCategorie:MetalCategorie:SmallCategorie:Wood {{SafetyCat6}} {{NoiseCat3}} We have two sets of transfer punches. One metric, one imper...')
 
Regel 1: Regel 1:
 
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Wood]]
 
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Wood]]
 +
{{MeasurementCare}}
 
{{SafetyCat6}}
 
{{SafetyCat6}}
 
{{NoiseCat3}}
 
{{NoiseCat3}}
Regel 13: Regel 14:
  
 
Kept in the metal workshop - but also very useful if you are working with hard wood.
 
Kept in the metal workshop - but also very useful if you are working with hard wood.
 
{{MeasurementCare}}
 

Versie van 24 mei 2019 om 09:40

Sjabloon:MeasurementCare

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

We have two sets of transfer punches. One metric, one imperial.

Transferpunch
Transverpunch-closeup.jpeg

There are to (very accurately) transfer a hole to a plate/object under that hole.

See youtube or https://www.table-saw-guide.com/transfer-punch.html for an example.

Kept in the metal workshop - but also very useful if you are working with hard wood.