TransferPunch OverbrengStempel

We have two sets of transfer punches. One metric, one imperial (try not to mix them).

Transferpunch

There are to (very accurately) transfer a hole to a plate/object under that hole.

See youtube or https://www.table-saw-guide.com/transfer-punch.html for an example.

Kept in the metal workshop - but also very useful if you are working with hard wood.

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

WARNING: Imperial tools have slightly different sizes than Metric ones.

Using the wrong one will often damage the bolt, nut or whatever you are working on. See this list for all the imperial tools we have.

Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.
Be especially careful with the close friends, such as sizes like 5/8inch and 16mm;
although the difference is 0.13mm - you will ruin (or usually just crack) a collet or similar..