Ultimaker2: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Printing on the Ultimaker 2 + or Ultimaker 2 Extended +: Other adjustments)
(Small typo's and corrections)
Regel 1: Regel 1:
 
[[Category:CNC]][[Category:Tool]]
 
[[Category:CNC]][[Category:Tool]]
{{SafetyCat3}}
+
{{SafetyCat3}}
{{NoiseCat3}}  
 
  
== Ultimaker printers ==
 
  
 +
This equipment is safety category 3:
 +
* Mandatory, in person, instructions.<br />
 +
* Make sure you read the Wiki before asking.
 +
 +
 +
This equipment is safety category 3:
 +
 +
* Mandatory, in person, instructions.<br />
 +
* Make sure you read the Wiki before asking.
 +
 +
 +
{{NoiseCat3}}
 +
 +
 +
This equipment is Noise Category 3: Can be used at all hours. No limits.
 +
 +
 +
 +
 +
 +
==Ultimaker printers==
 
The Makerspace has two 3D printers:
 
The Makerspace has two 3D printers:
* Ultimaker 2 + <Br/>
+
* Ultimaker 2 + <br />
* Ultimaker 2 Extended + <Br/>
+
* Ultimaker 2 Extended + <br />
 
Both printer are operated the same. This manual is applicable to both printers.
 
Both printer are operated the same. This manual is applicable to both printers.
  
== Manual and procedures ==
+
==Manual and procedures==
 
   
 
   
 +
 +
 
* [[3D-printen|Software for designing and converting .stl files to printable GCODE files]]
 
* [[3D-printen|Software for designing and converting .stl files to printable GCODE files]]
 
* [https://support.ultimaker.com/hc/en-us/sections/360003504360 Ultimaker Documentation]  
 
* [https://support.ultimaker.com/hc/en-us/sections/360003504360 Ultimaker Documentation]  
 
* [https://support.ultimaker.com/hc/en-us/articles/360011811480-The-Ultimaker-2-user-manuals Ultimaker Manuals]
 
* [https://support.ultimaker.com/hc/en-us/articles/360011811480-The-Ultimaker-2-user-manuals Ultimaker Manuals]
  
== Characteristics of the printers ==
+
==Characteristics of the printers==
 +
 
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
! Property !! Ultimaker 2+ !! Ultimaker 2 Extended +
+
! Property
|-
+
! Ultimaker 2+
| Max. size [mm] || 223x223x205 || 223x223x305
+
! Ultimaker 2 Extended +
 
|-
 
|-
| Nozzle size || 0.25, 0.4, 0.6, 0.8 || 0.25, 0.4, 0.6, 0.8
+
| Max. size [mm]
 +
| 223x223x205
 +
| 223x223x305
 
|-
 
|-
| - || - || -
+
| Nozzle size
 +
| 0.25, 0.4, 0.6, 0.8
 +
| 0.25, 0.4, 0.6, 0.8
 
|}
 
|}
  
== Settings ==
+
==Settings==
  
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
! Setting !! PLA !! ABS !! PETG
+
! Setting
 +
! PLA
 +
! ABS
 +
! PETG
 
|-
 
|-
| Printing temperature || - || 250 °C || -
+
| Printing temperature
 +
| -
 +
| 250 °C
 +
| -
 
|-
 
|-
| Printing table temp. || - || 110 °C || -
+
| Printing table temp.
 +
| -
 +
| 110 °C
 +
| -
 
|-
 
|-
| Printing speed || 60 mm/s || 25 mm/s || -
+
| Printing speed
 +
| 60 mm/s
 +
| 25 mm/s
 +
| -
 
|-
 
|-
| Fan speed|| 100% || 20% || -
+
| Fan speed
 +
| 100%
 +
| 20%
 +
| -
 
|}
 
|}
  
 
See [https://support.ultimaker.com/hc/en-us/categories/360002336619 Ultimaker Materials] for more information on these materials and information about other materials that can be printed with the or Ultimaker2+ printers
 
See [https://support.ultimaker.com/hc/en-us/categories/360002336619 Ultimaker Materials] for more information on these materials and information about other materials that can be printed with the or Ultimaker2+ printers
  
== Printing on the Ultimaker 2 + or Ultimaker 2 Extended + ==
+
==Printing on the Ultimaker 2 + or Ultimaker 2 Extended +==
 
 
 
'''Preparation:''' If you like you can do this at home
 
'''Preparation:''' If you like you can do this at home
 
# [[3D-printen|Prepare the GCODE file(s)and copy to a SD card]]
 
# [[3D-printen|Prepare the GCODE file(s)and copy to a SD card]]
Regel 53: Regel 93:
 
# Enter the SD card with GCODE file(s) into the SD card reader on the front panel of the 3D printer
 
# Enter the SD card with GCODE file(s) into the SD card reader on the front panel of the 3D printer
 
# Prepare the print table for printing  
 
# Prepare the print table for printing  
## For PAL: Apply thin glue layer with glue stick  
+
## For PLA: Apply thin glue layer with glue stick  
## For ABS: Use painters tape to cover printing area
+
## For ABS: Use painters tape to cover printing area  
 
# Switch on Ultimaker on the back side of the machine
 
# Switch on Ultimaker on the back side of the machine
  
Regel 61: Regel 101:
 
For the next steps you use the rotary dial on the front of the printer.  
 
For the next steps you use the rotary dial on the front of the printer.  
 
* Turn the wheel to go to a menu item.  
 
* Turn the wheel to go to a menu item.  
* Select (choose) a menu item by pushing on the rotary dial.  
+
* Push the rotary dial to select (choose) a menu item.  
  
 
'''Setting up the printer for printing and start printing'''
 
'''Setting up the printer for printing and start printing'''
Regel 93: Regel 133:
 
## Store filament in the appropriate location
 
## Store filament in the appropriate location
  
== Unattended running ==
+
==Unattended running==
 
 
 
The two white Ultimaker 3D printers are one of the few machines that can run unattended e.g. during the night.  
 
The two white Ultimaker 3D printers are one of the few machines that can run unattended e.g. during the night.  
  
Unattended printing on or two Ultimaker printer, that is leave the machine on and printing when you leave the building is only allowed when you follow below rules.  
+
Unattended printing only allowed when you follow these rules.  
  
 
# Make sure you have enough PLA on the spool and check that it won't tangle as it unrolls.
 
# Make sure you have enough PLA on the spool and check that it won't tangle as it unrolls.
Regel 107: Regel 146:
 
Please leave a note with your name and email, so people can contact you, when something looks wrong, or want to know what you planning.
 
Please leave a note with your name and email, so people can contact you, when something looks wrong, or want to know what you planning.
  
== Releasing clocked material from nozzle ==
+
==Atomic Pull: Releasing clocked material from nozzle==
 
Over time the printing nozzle can get clocked with filament. To clean the nozzle follow these steps:
 
Over time the printing nozzle can get clocked with filament. To clean the nozzle follow these steps:
  
# Remove remaning filament
+
# Remove remaining filament
 
# Get a 30cm of Nylon filament and straighten it as much as possible (there is a box with leftovers)  
 
# Get a 30cm of Nylon filament and straighten it as much as possible (there is a box with leftovers)  
# Remove the blue horshoe clip underneath the white coupling
+
# Remove the blue horsehoe clip underneath the white coupling
 
# Remove the filament tube out of the print head, while holding the white coupling
 
# Remove the filament tube out of the print head, while holding the white coupling
 
# Select in the main menu "Advanced"
 
# Select in the main menu "Advanced"
Regel 122: Regel 161:
 
# Repeat this process as often as required
 
# Repeat this process as often as required
  
See also: <br/>
+
See also: <br />
* [https://www.youtube.com/watch?v=M2-pHgJQaI4 Automic Cleanout (Youtube)] <Br/>
+
* [https://www.youtube.com/watch?v=M2-pHgJQaI4 Automic Cleanout (Youtube)] <br />
 
* [https://support.3dverkstan.se/article/10-the Automic Cleanout manual]
 
* [https://support.3dverkstan.se/article/10-the Automic Cleanout manual]
  
== Maintenance ==
+
==Maintenance==
 
 
 
See [https://support.ultimaker.com/hc/en-us/sections/360003548819-Maintenance Maintenance Ultimaker 2+] for detailed descriptions on maintenance.
 
See [https://support.ultimaker.com/hc/en-us/sections/360003548819-Maintenance Maintenance Ultimaker 2+] for detailed descriptions on maintenance.
  
==== Recommended maintenance schedule ====
+
====Recommended maintenance schedule====
 
 
 
To keep your Ultimaker 2+ in optimal condition we recommend the following maintenance schedule, based on 1,500 printing hours per year:
 
To keep your Ultimaker 2+ in optimal condition we recommend the following maintenance schedule, based on 1,500 printing hours per year:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
! Every month !! Every three months !! Every Year
+
! Every month
 +
! Every three months
 +
! Every Year
 +
|-
 +
| Clean Printer
 +
| Check for plays on axels
 +
| Clean feeder and replace Bowden tube
 
|-
 
|-
| Clean Printer || Check for plays on axels || Clean feeder and replace Bowden tube
+
| Lubricate axles
 +
| Check for tension of short belts
 
|-
 
|-
| Lubricate axles || Check for tension of short belts
+
|  
|-
+
| Lubricate lead screw Z moto
|  || Lubricate lead screw Z moto ||
+
| 
 
|-
 
|-
| || Re-tighten hot end isolator ||
+
|  
 +
| Re-tighten hot end isolator
 +
| 
 
|}
 
|}

Versie van 15 nov 2020 om 19:09

This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.


This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.


This equipment is safety category 3:

  • Mandatory, in person, instructions.
  • Make sure you read the Wiki before asking.

This equipment is Noise Category 3: Can be used at all hours. No limits.


This equipment is Noise Category 3: Can be used at all hours. No limits.



Ultimaker printers

The Makerspace has two 3D printers:

  • Ultimaker 2 +
  • Ultimaker 2 Extended +

Both printer are operated the same. This manual is applicable to both printers.

Manual and procedures

Characteristics of the printers

Property Ultimaker 2+ Ultimaker 2 Extended +
Max. size [mm] 223x223x205 223x223x305
Nozzle size 0.25, 0.4, 0.6, 0.8 0.25, 0.4, 0.6, 0.8

Settings

Setting PLA ABS PETG
Printing temperature - 250 °C -
Printing table temp. - 110 °C -
Printing speed 60 mm/s 25 mm/s -
Fan speed 100% 20% -

See Ultimaker Materials for more information on these materials and information about other materials that can be printed with the or Ultimaker2+ printers

Printing on the Ultimaker 2 + or Ultimaker 2 Extended +

Preparation: If you like you can do this at home

  1. Prepare the GCODE file(s)and copy to a SD card

Preparing the printer

  1. Enter the SD card with GCODE file(s) into the SD card reader on the front panel of the 3D printer
  2. Prepare the print table for printing
    1. For PLA: Apply thin glue layer with glue stick
    2. For ABS: Use painters tape to cover printing area
  3. Switch on Ultimaker on the back side of the machine

Using the printer menu

For the next steps you use the rotary dial on the front of the printer.

  • Turn the wheel to go to a menu item.
  • Push the rotary dial to select (choose) a menu item.

Setting up the printer for printing and start printing

  1. Change material:
    1. To change material or the enter material in to the printer, choose Material in the main menu
    2. Choose Change. The machine heats up and first will remove existing material
    3. Choose Ready once material is removed
  2. Feeding new Material
    1. Feed new material on the back side of the UltiMaker
    2. Choose Ready once the material is transported through the tube. The material will be transported to the nozzle.
    3. Wait till material flows through nozzle and confirm by selecting Ready
    4. Return to main menu by selection Return
  3. Start printing
    1. Select Print
    2. Choose the file you want to print. The printer heats up to the required temperature.
  4. Printing
    1. Once the nozzle and print table are at the required temperature, the printer will start.
    2. Printer releases small amount of filament through the nozzle
    3. The printer starts printing
    4. The display shows the expected time for the print

Post printing, aka removing your printed model and cleaning up

  1. Print ready
    1. Allow the printer table to cool down. Too early removal of the print may damage the print
    2. Remove the print from the print table. You can use the thin putty knife, from the box, to gently pry your print from the table
    3. Clean the printer table when required (remove glue / painter tape)
    4. Remove the Filament from the printer by executing step 3 of this procedure
    5. Once the filament is removed, switch off the print with the switch on the backside of the printer
    6. Store filament in the appropriate location

Unattended running

The two white Ultimaker 3D printers are one of the few machines that can run unattended e.g. during the night.

Unattended printing only allowed when you follow these rules.

  1. Make sure you have enough PLA on the spool and check that it won't tangle as it unrolls.
  2. Only print with Ultimaker listed and approved material. E.g. normal PLA, with normal settings.
  3. You stay with the printer for the first 10 layers or 15 minutes to check the printing process.
  4. You accept that other members have the right to remove your print, when it is finished or failed.
  5. Plan to remove your print soon after it is finished, e.g. the next morning when you print overnight.

Please leave a note with your name and email, so people can contact you, when something looks wrong, or want to know what you planning.

Atomic Pull: Releasing clocked material from nozzle

Over time the printing nozzle can get clocked with filament. To clean the nozzle follow these steps:

  1. Remove remaining filament
  2. Get a 30cm of Nylon filament and straighten it as much as possible (there is a box with leftovers)
  3. Remove the blue horsehoe clip underneath the white coupling
  4. Remove the filament tube out of the print head, while holding the white coupling
  5. Select in the main menu "Advanced"
  6. Select "Heatup Nozzle"
  7. Raise the nozzle temperature to 260 degrees
  8. Once on right temperature, insert the straightened piece of filament into the nozzle
  9. Set the temperature to 90 degrees and wait for the printer to reach this temperature
  10. Pull out the filament, be aware, this may require substantial force
  11. Repeat this process as often as required

See also:

Maintenance

See Maintenance Ultimaker 2+ for detailed descriptions on maintenance.

Recommended maintenance schedule

To keep your Ultimaker 2+ in optimal condition we recommend the following maintenance schedule, based on 1,500 printing hours per year:

Every month Every three months Every Year
Clean Printer Check for plays on axels Clean feeder and replace Bowden tube
Lubricate axles Check for tension of short belts
Lubricate lead screw Z moto  
Re-tighten hot end isolator