Verdeel - Rotary table: verschil tussen versies
(→Mounting something on it) |
(→Mounting on the Abene) |
||
| Regel 19: | Regel 19: | ||
[[Bestand:rotary-table-diagonal.jpg|400px]] | [[Bestand:rotary-table-diagonal.jpg|400px]] | ||
| + | |||
| + | So the 'low' end is in de middle groove; the high end is in the front one. This let you still rotate the handle - but have a wider range so you do not hit the 'back' stop. | ||
Versie van 23 nov 2019 om 23:01
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Flat, rotary table. It can be mounted on the various milling and cutting machines.
Mounting something on it
It will take the smallest sized nuts for mounting -- but often it is easier to use the M12 bolts that are in the top drawer of the blue cabinet.
Mounting on the Abene
Depending on what you want to do - you may need to mount the plate diagonal on the Abene VHF3 Metaalfrees machine on order to get a wider range. See image blow
So the 'low' end is in de middle groove; the high end is in the front one. This let you still rotate the handle - but have a wider range so you do not hit the 'back' stop.
