Verzinkboren - countersink drill - counterbore: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Nieuwe pagina aangemaakt met 'There is a large box of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and SnijOlie BoorOlie Cutt...')
 
Regel 1: Regel 1:
There is a large box of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and [[SnijOlie BoorOlie CuttingOil|Cutting oil]].
+
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]]
 +
{{SafetyCat6}}
 +
{{NoiseCat3}}
  
There are special wood ones in the wood area.
+
== Metal ==
 +
 
 +
There is a large, blue, box of 8 sizes of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and [[SnijOlie BoorOlie CuttingOil|Cutting oil]].
 +
 
 +
This includes angled and square ones.
 +
 
 +
== Wood ==
  
 
[[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]]
 
[[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]]
 +
 +
There are special wood ones in the wood area - kept in the red box with drills on the workbench side of the woodship.
 +
 +
There is a wooden box with small ones above the mitre saw.

Versie van 16 dec 2019 om 16:16

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Metal

There is a large, blue, box of 8 sizes of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and Cutting oil.

This includes angled and square ones.

Wood

Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout

There are special wood ones in the wood area - kept in the red box with drills on the workbench side of the woodship.

There is a wooden box with small ones above the mitre saw.