Verzinkboren - countersink drill - counterbore: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Wood)
Regel 13: Regel 13:
 
[[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]]
 
[[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]]
  
There are special wood ones in the wood area - kept in the red box with drills on the workbench side of the woodship.
+
There are special wood ones in the wood area - kept on the stand of the [[DeWalt Handdrill]] and [[DeWalt Impact drill/electric screwdriver]]; in front of the red box with [[Wood Drills|drills]] on the workbench side of the woodship.
  
 
There is a wooden box with small ones above the mitre saw.
 
There is a wooden box with small ones above the mitre saw.

Versie van 19 dec 2019 om 18:28

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Metal

There is a large, blue, box of 8 sizes of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and Cutting oil.

This includes angled and square ones.

Wood

Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout

There are special wood ones in the wood area - kept on the stand of the DeWalt Handdrill and DeWalt Impact drill/electric screwdriver; in front of the red box with drills on the workbench side of the woodship.

There is a wooden box with small ones above the mitre saw.