Vice Collet Holders - spantang houder voor bankschroef: verschil tussen versies

Versie van 23 nov 2019 om 17:06

To mount in a vice - to hold round things using the ER 25 collets in all sort of sizes.

We also have two ER25 collet holders; one square, one hex.

To hold something round in a vice; and be able to rotate it at tight/accurate angles.

For example to turn the end of something round into a hex or square that you can rotate with a spanner. Or get a flat side on something round.

If you've not use this before - then ask someone to show you; or check youtube.

Metal area - blue cabinet (with the collets).

Bought by the space in October 2019 from China

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

@@ Regel 1: / Regel 1: @@
 [[categorie:tool]][[categorie:welding]][[category:metal]]
-[[Bestand:collet-holder.jpg|miniatuur]]
 To mount in a vice - to hold round things using the [[ER 25/32/40 Collets and holders|ER 25 collets]] in all sort of sizes.
+[[Bestand:Er25-holder.jpg|600px]]
+We also have two ER25 collet holders; one square, one hex.
+To hold something round in a vice; and be able to rotate it at tight/accurate angles.
+For example to turn the end of something round into a hex or square that you can rotate with a spanner. Or get a flat side on something round.
 If you've not use this before - then ask someone to show you; or check youtube.