Brontekst bekijken van ER 25/32/40 Collets and holders

[[Category:Tool]][[Category:Metal]][[Category:SafetySheet]]
{{SafetyCat3}}
{{NoiseCat3}}

[[Bestand:Er25-set|miniatuur|ER25 metric collet set]]

Set of METRIC collets -- for the ER25 holder of the Abene, Metal Lathe and Wood Lathe. Sizes 1mm - 16mm -- and each will take 1mm smaller. So actual range is 0 to 16mm. Do not use them outside this range. They will break (check the box with the boring bar for examples).

Make sure you `angle-click' the collet into the nut (do not force it straight). H�ave someone show you if you've not done it before -- as it is easy to get them out of shape this way -- causing vibration.

== History ==

Bought June 2019.