Leveranciers: verschil tussen versies
(Restructuring Category Tree) |
|||
| (56 tussenliggende versies door 7 gebruikers niet weergegeven) | |||
| Regel 4: | Regel 4: | ||
==Winkels== | ==Winkels== | ||
Een verzameling winkels waar diverse "makergerelateerde" dingen te koop zijn. Deze informatie komt deels van de [[Lasersaur]] pagina. | Een verzameling winkels waar diverse "makergerelateerde" dingen te koop zijn. Deze informatie komt deels van de [[Lasersaur]] pagina. | ||
| − | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Regel 57: | Regel 56: | ||
|NL | |NL | ||
|- | |- | ||
| − | |[http://www. | + | |[https://www.dokter-plexiglas.nl/ dokter-plexiglas.nl] |
| + | |Plastic | ||
| + | | | ||
| + | |NL | ||
| + | |- | ||
| + | |[http://www.kunststofshop.nl Kunstofshop] | ||
|Plastic | |Plastic | ||
|([[Lasersaur]]:) voor de aluminium-composiet en polycarbonaat buitenbekleding van de Saur | |([[Lasersaur]]:) voor de aluminium-composiet en polycarbonaat buitenbekleding van de Saur | ||
| Regel 111: | Regel 115: | ||
|goedkope, goede soldeerflux, startende shop, variabel assortiment | |goedkope, goede soldeerflux, startende shop, variabel assortiment | ||
|NL | |NL | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
|- | |- | ||
|[https://www.techwinkel.nl/ techwinkel.nl] | |[https://www.techwinkel.nl/ techwinkel.nl] | ||
| Regel 145: | Regel 144: | ||
Chemicals: | Chemicals: | ||
| − | + | <pre> | |
MARAWE GmbH & Co. KG | MARAWE GmbH & Co. KG | ||
Donaustaufer Straße 378 | Gebäude 64 + 46 | Donaustaufer Straße 378 | Gebäude 64 + 46 | ||
| Regel 153: | Regel 152: | ||
E-Mail: info@marawe.de | Internet: www.marawe.de | E-Mail: info@marawe.de | Internet: www.marawe.de | ||
</pre> | </pre> | ||
| + | <pre>MARAWE GmbH & Co. KGDonaustaufer Straße 378 | Gebäude 64 + 4693055 Regensburg | GermanyTel.: +49 941 29020439 | Fax: +49 941 29020593E-Mail: info@marawe.de | Internet: www.marawe.de</pre> | ||
| + | |||
| − | |||
| − | + | ==General suppliers in and around Leiden== | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Hartwijk and de Action (Langegracht, naast de parkeergarage en Politieburea) are very near to the space (walking distance). The Action has wood glue, some tools/nails/stuff and paint. | Hartwijk and de Action (Langegracht, naast de parkeergarage en Politieburea) are very near to the space (walking distance). The Action has wood glue, some tools/nails/stuff and paint. | ||
| Regel 233: | Regel 162: | ||
Hartwijk usually has a small cart you can borrow if you need to move things like very large 2.5x1.2 meter plywood, etc. | Hartwijk usually has a small cart you can borrow if you need to move things like very large 2.5x1.2 meter plywood, etc. | ||
| − | ==== | + | ==General suppliers - webstores== |
| + | Roughly from good to bad: | ||
| + | |||
| + | * https://www.broederswebshop.nl/ - ventilation ducts, etc -- splendid service. * https://www.toolstation.nl - always delivered as agreed. * https://www.chronos.ltd.uk/ - great - but sometimes a bit expensive. * https://www.arceurotrade.co.uk - fast to arrive. always delivered as agreed. * https://www.rcm-machines.com/en/machine-accessories/attachments-mill/shell-end-mill-arbor/arbor-spacer/arbor-spacer,-boring-22-mm,-thickness-4-mm/rckdr224to soso * https://www.indi.nl/ - ok - but always over-asks & under-performs (by a bit). * https://www.hbm-machines.com/ -- generally OK for their (low) prices. But hassle not uncommon. * https://www.schleifscheibe-boetzow.de -- any size grinding wheels - for very reasonable prices. | ||
| − | + | to getting quite bad | |
| − | |||
| − | + | * https://www.gereedschapcentrum.nl - bad experience -- 3 orders of plenty `in stock' items > 3 weeks delayed because `stock' in a row (2019). * https://www.toolsxl.nl - bad experience -- 2 orders of `in stock' items > 2 and > 9 weeks delayed. | |
| − | |||
| − | + | ==Suppliers of tools== | |
| − | + | The below are online stores that sell tools, mostly woodworking tools, and will ship to the Netherlands. | |
| − | |||
| − | |||
| − | |||
| − | to | ||
| − | |||
| − | |||
| − | |||
| − | to | + | * https://fine-tools.com/ - Dieter Schmid fine tools - Based in Berlin, excellent selection of woodworking tools from affordable, to extremely expensive. |
| + | * https://dictum.com/ - Dictum - Based in Munchen and Plattling, excellent selection of tools including woodworking, metalworking, leatherworking and more. They also have a limited availability of materials including specialist metals for knife making. | ||
| + | * https://sautershop.com - Sauter Shop - based in Herrsching, excellent selection of tools, mostly woodworking, but they also have cnc supplies. | ||
| + | * https://ecotools.nl - Ecotools - Based in Duurstede, wide selection of blades, bits, drills, screws, and the like. Not the best quality but good enough for most tasks. Their router bits are very good value for money. | ||
| + | * https://baptist.nl - Baptist - Based in Arnhem, has an actual physical shop you can visit, excellent range of tools from affordable own brand, to incredibly expensive. If you visit in person, staff are very knowledgeable and able to help. Also wide range of hardware such as hinges. Round the corner from Arnhem fijnhout (see below), so worth combining the two in one visit. | ||
| + | * ?? - Add your recommendations here. | ||
| − | + | If you're ordering from any of the above, do announce it on the mailing list, most of them have a free postage threshold, which is easy to reach if there's 2 or more of you ordering. | |
| − | |||
| − | == | + | ==Suppliers of metals== |
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|- | |- | ||
| − | + | ! Company | |
| − | + | ! City | |
| − | + | ! Address | |
| − | + | ! Wood | |
| − | + | ! Metal | |
| − | + | ! Electronics | |
| − | + | ! Plumbing | |
| − | + | ! Fabrics | |
| − | + | ! Paints | |
| − | + | ! Tools | |
| − | + | ! Reputation | |
| − | + | ! Comments | |
| − | + | ! Recommender | |
|- | |- | ||
| − | + | | [http://www.hartwijk.nl '''Warmteservice'''] | |
| − | + | | Leiden | |
| − | + | | Flevoweg 39-B, 2318 BX Leiden | |
| − | + | | | |
| − | + | | | |
| − | + | | electrics | |
| − | + | | Yes | |
| − | + | | | |
| − | + | | | |
| − | + | | Yes | |
| − | + | | ★★★★ | |
| − | + | | 'Excellent advise' | |
| − | + | | ? | |
|- | |- | ||
| − | + | | [https://www.hartwijk.nl/ '''W.P.Hartwijk & zn. B.V.'''] | |
| − | + | | Leiden | |
| − | + | | Lammermarkt 3, Tegenover Molen de Valk, 2312CK Leiden | |
| − | + | | Yes | |
| − | + | | Yes | |
| − | + | | electrics | |
| − | + | | Yes | |
| − | + | | No | |
| − | + | | Yes | |
| − | + | | Yes | |
| − | + | | ★★★★ | |
| − | + | | 'Excellent advise' specialist tools & materials | |
| − | + | | ? | |
|- | |- | ||
| − | + | | [https://www.google.com/maps/contrib/114057090005618827011/photos/@52.1589129,4.4960436,17z/data=!3m1!4b1!4m3!8m2!3m1!1e1 '''A.van Borselen & co'''] | |
| − | + | | Leiden | |
| − | + | | Hooigracht 64, 2312 KV Leiden | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | ★★★★ | |
| − | + | | 'Excellent advise' specialist paints & materials | |
| − | + | | ? | |
|- | |- | ||
| − | + | | [https://www.toolstation.nl/ Tool station] | |
| − | + | | Leiden | |
| − | + | | Rooseveltstraat 49, 2321 BL Leiden | |
| − | + | | Some | |
| − | + | | Some | |
| − | + | | electrics | |
| − | + | | Yes | |
| − | + | | No | |
| − | + | | Yes | |
| − | + | | Yes | |
| − | + | | | |
| − | + | | Lots | |
| − | + | | ? | |
|- | |- | ||
| − | + | | [http://www.oliehandel-hvdberg.nl Oliehandel H van den Berg] | |
| − | + | | Leiden | |
| − | + | | Rijndijk 232, 2331 AL Leiden | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | | |
| − | + | | ★★★★ | |
| − | + | | Reliable, Knowledgable, Excelent advice, always has stock / alternatives | |
| − | + | | ? | |
|- | |- | ||
| − | + | | [https://www.bouwhof.nl/ Bouwhof] | |
| − | + | | Zoetermeer | |
| − | + | | Edisonstraat 115, 2723 RT Zoetermeer | |
| − | + | | Yes | |
| − | + | | | |
| − | + | | Electrics | |
| − | + | | Yes | |
| − | + | | | |
| − | + | | Yes | |
| − | + | | Yes | |
| − | + | | ? | |
| − | + | | Enorme winkel met zeer breed assortiment. Begane grond is helemaal voor klussen. Mooie spullen. Alles van KWB en Proxxon. Maak ook heel veel dingen die je gewoon niet vindt bij de Praxis of Gamma. Zoals bijvoorbeeld een hele goede knutsel/makershoek! | |
| − | + | | Jan | |
|} | |} | ||
| + | ! Company ! City ! Address ! Wood ! Metal ! Electronics ! Plumbing ! Fabrics ! Paints ! Tools ! Reputation ! Comments ! Recommender | [http://hpelgrim.com/ '''H. Pelgrim B.V.'''] | Leiden | Rooseveltstraat 14, 2321 BM Leiden | | Yes, steel | | | | | | ★★★ | | Henry | [https://www.radiotwenthe.nl/ '''Radio Twenthe'''] | Den Haag | Stille Veerkade 11, 2512BE Den Haag | | | Yes | | | | | ★★★ | Good advice, various kinds of electronics parts | Jelle, Hans | [https://www.yesss.nl/nl/page/27/yesss-leiden/static.aspx '''Yesss Electrical'''] | Leiden | Flevoweg 2b, 2318 BZ Leiden | | | Yes | | | | | ★★★ | | Henry, Anne | [https://zirk.nl/ '''Zirkzee Profiel & Plaat BV'''] | Leiden | Flevoweg 37, 2318 BX Leiden | | Yes, aluminium/brass/stainless steel | | | | | | ★★★ | | Henry, Anne | [https://two4steel.nl/ '''Two 4 Steel BV'''] | Zwaag | De corantijn 18, 1689 AP Zwaag | | Yes, steel specialist. Very wide variety. webshop useful for precision ground 1.2510 (O1) toolsteel. | | | | | | ★★★★ | | Julia | [http://staalconsulent.nl/ '''Abrams / premium steel'''] | Osnabruck, DE | | | Steel, C45U but also the nice stuff. | | | | | | ★★★★ | Very nice steel selector tool. | Dirkx | ||
| + | |||
| + | ==Metal profiles and where to find them== | ||
| − | |||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
|- | |- | ||
| − | | Hornbach | + | !Winkel |
| − | | 21-07-2018 | + | !Datum |
| − | | L profiel | + | !Type |
| − | | 15 | + | !Dikte 1 |
| − | | 15 | + | !Dikte 2 |
| − | | 1,5 | + | !Dikte Materiaal |
| − | | 3000 | + | !Lengte |
| − | | 11,50 | + | !Prijs |
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |L profiel | ||
| + | |15 | ||
| + | |15 | ||
| + | |1,5 | ||
| + | |3000 | ||
| + | |11,50 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |L profiel | ||
| + | |20 | ||
| + | |20 | ||
| + | |3,0 | ||
| + | |3000 | ||
| + | |13,50 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |L profiel | ||
| + | |25 | ||
| + | |25 | ||
| + | |3,0 | ||
| + | |3000 | ||
| + | |14,25 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |L profiel | ||
| + | |30 | ||
| + | |30 | ||
| + | |3,0 | ||
| + | |3000 | ||
| + | |15,00 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |T profiel | ||
| + | |20 | ||
| + | |20 | ||
| + | |3,0 | ||
| + | |3000 | ||
| + | |11,95 | ||
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |T profiel |
| − | | | + | |25 |
| − | | | + | |25 |
| − | | 3, | + | |3,5 |
| − | | 3000 | + | |3000 |
| − | | | + | |15,95 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |Buis Vierkant |
| − | | | + | |16 |
| − | | | + | |16 |
| − | | | + | |1,0 |
| − | | 3000 | + | |3000 |
| − | | | + | |8,95 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |Buis Vierkant |
| − | | | + | |20 |
| − | | | + | |20 |
| − | | | + | |1,5 |
| − | | 3000 | + | |3000 |
| − | | | + | |11,20 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |Buis Vierkant |
| − | | | + | |25 |
| − | | | + | |25 |
| − | | | + | |1,5 |
| − | | 3000 | + | |3000 |
| − | | | + | |13,85 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |Buis Rechthoekig |
| − | | | + | |40 |
| − | | | + | |20 |
| − | | | + | |2,0 |
| − | | 3000 | + | |3000 |
| − | | | + | |23,00 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | Buis | + | |Buis Rechthoekig |
| − | | | + | |40 |
| − | | | + | |30 |
| − | | | + | |2,0 |
| − | | 3000 | + | |3000 |
| − | | | + | |22,95 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |U profiel |
| − | | 20 | + | |20 |
| − | | | + | |16 |
| − | | | + | |2,0 |
| − | | 3000 | + | |3000 |
| − | | | + | |15,50 |
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |Staf Vierkant | ||
| + | |10 | ||
| + | |10 | ||
| + | | | ||
| + | |3000 | ||
| + | |8,90 | ||
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |Staf Vierkant |
| − | | | + | |12 |
| − | | | + | |12 |
| − | | | + | | |
| − | | 3000 | + | |3000 |
| − | | | + | |11,90 |
|- | |- | ||
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |L profiel |
| − | | | + | |15 |
| − | | | + | |15 |
| − | | 2 | + | |1,2 |
| − | | | + | |2000 |
| − | | | + | |8,05 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |L profiel |
| − | | 20 | + | |20 |
| − | | | + | |20 |
| − | | | + | |3,0 |
| − | | | + | |2000 |
| − | | | + | |7,37 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | Staf | + | |L profiel |
| − | | | + | |25 |
| − | | | + | |25 |
| − | | | + | |3,0 |
| − | | | + | |2000 |
| − | | | + | |9,20 |
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |L profiel | ||
| + | |30 | ||
| + | |30 | ||
| + | |3,0 | ||
| + | |2000 | ||
| + | |9,95 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |T profiel | ||
| + | |20 | ||
| + | |20 | ||
| + | |3,0 | ||
| + | |2000 | ||
| + | |8,75 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |T profiel | ||
| + | |25 | ||
| + | |25 | ||
| + | |3,0 | ||
| + | |2000 | ||
| + | |12,25 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |Platte Staf | ||
| + | |20 | ||
| + | | | ||
| + | |4,0 | ||
| + | |2000 | ||
| + | |5,50 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |Platte Staf | ||
| + | |25 | ||
| + | | | ||
| + | |4,0 | ||
| + | |2000 | ||
| + | |7,00 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |Platte Staf | ||
| + | |30 | ||
| + | | | ||
| + | |6,0 | ||
| + | |2000 | ||
| + | |9,70 | ||
| + | |- | ||
| + | |Hornbach | ||
| + | |21-07-2018 | ||
| + | |U profiel | ||
| + | |20 | ||
| + | |17 | ||
| + | |1,5 | ||
| + | |2000 | ||
| + | |6,55 | ||
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |Buis rechthoekig |
| − | | | + | |40 |
| − | | | + | |20 |
| − | | | + | |2,0 |
| − | | | + | |2000 |
| − | | | + | |15,00 |
|- | |- | ||
| − | | | + | |Hornbach |
| − | | | + | |21-07-2018 |
| − | | | + | |Buis rechthoekig |
| − | | | + | |40 |
| − | | | + | |30 |
| − | | | + | |1,5 |
| − | | | + | |2000 |
| − | | | + | |19,06 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |Buis vierkant |
| − | | | + | |16 |
| − | | | + | |16 |
| − | | 1, | + | |1,0 |
| − | | 2000 | + | |2000 |
| − | | | + | |6,95 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |Buis vierkant |
| − | | 20 | + | |20 |
| − | | 20 | + | |20 |
| − | | | + | |1,5 |
| − | | 2000 | + | |2000 |
| − | | | + | |9,25 |
|- | |- | ||
| − | | Hornbach | + | |Hornbach |
| − | | 21-07-2018 | + | |21-07-2018 |
| − | | | + | |Buis vierkant |
| − | | 25 | + | |25 |
| − | | 25 | + | |25 |
| − | | | + | |1,5 |
| − | | 2000 | + | |2000 |
| − | | | + | |10,42 |
|- | |- | ||
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |Buis rond |
| − | | | + | |12 |
| − | | | + | | |
| − | | | + | |1,0 |
| − | | | + | |1000 |
| − | | | + | |2,29 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |Buis rond |
| − | | | + | |16 |
| − | | | + | | |
| − | | | + | |1,0 |
| − | | | + | |1000 |
| − | | | + | |2,99 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |Buis rond |
| − | | | + | |22 |
| − | | | + | | |
| − | | | + | |1,2 |
| − | | | + | |1000 |
| − | | | + | |4,69 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |Buis rond |
| − | | | + | |22 |
| − | | | + | | |
| − | | | + | |1,2 |
| − | | | + | |1000 |
| − | | | + | |4,69 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |Buis vierkant |
| − | | | + | |16 |
| − | | | + | | |
| − | | | + | |1,0 |
| − | | | + | |1000 |
| − | | | + | |3,69 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |Buis vierkant |
| − | | 20 | + | |20 |
| − | | | + | | |
| − | | 1,5 | + | |1,5 |
| − | | | + | |1000 |
| − | | | + | |4,99 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | Buis | + | |Buis vierkant |
| − | | | + | |25 |
| − | | | + | | |
| − | | | + | |1,5 |
| − | | | + | |1000 |
| − | | | + | | |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |L profiel |
| − | | | + | |20 |
| − | | | + | |20 |
| − | | | + | |3,0 |
| − | | | + | |1000 |
| − | | | + | |4,39 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |L profiel |
| − | | | + | |25 |
| − | | | + | |25 |
| − | | | + | |3,0 |
| − | | | + | |1000 |
| − | | | + | |5,99 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |Staf plat |
| − | | | + | |10 |
| − | | | + | | |
| − | | | + | |4,0 |
| − | | | + | |1000 |
| − | | | + | |2,29 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |Staf plat |
| − | | | + | |20 |
| − | | | + | | |
| − | | | + | |4,0 |
| − | | | + | |1000 |
| − | | | + | |3,69 |
|- | |- | ||
| − | | | + | |Praxis |
| − | | | + | |30-12-2018 |
| − | | | + | |Staf plat |
| − | | | + | |25 |
| − | | | + | | |
| − | | | + | |4,0 |
| − | | | + | |1000 |
| − | | | + | |4,19 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | | + | |Staf rond |
| − | | | + | |6 |
| − | | | + | | |
| − | | | + | | |
| − | | 1000 | + | |1000 |
| − | | | + | |1,49 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | | + | |Staf rond |
| − | | | + | |8 |
| − | | | + | | |
| − | | | + | | |
| − | | 1000 | + | |1000 |
| − | | 2, | + | |2,19 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | | + | |Staf rond |
| − | | | + | |10 |
| − | | | + | | |
| − | | | + | | |
| − | | 1000 | + | |1000 |
| − | | | + | |3,39 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | | + | |Staf rond |
| − | | | + | |12 |
| − | | | + | | |
| − | | | + | | |
| − | | 1000 | + | |1000 |
| − | | | + | | |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | | + | |Staf vierkant |
| − | | | + | |6 |
| − | | | + | | |
| − | | | + | | |
| − | | 1000 | + | |1000 |
| − | | | + | |2,19 |
|- | |- | ||
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
| − | | | + | | |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | Buis vierkant | + | |Buis vierkant |
| − | | | + | |16 |
| − | | | + | | |
| − | | 1, | + | |1,0 |
| − | | | + | |2000 |
| − | | | + | |7,19 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | | + | |Buis vierkant |
| − | | 20 | + | |20 |
| − | | | + | | |
| − | | | + | |1,5 |
| − | | | + | |2000 |
| − | | | + | |9,59 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | | + | |Buis vierkant |
| − | | | + | |30 |
| − | | | + | | |
| − | | | + | |1,5 |
| − | | | + | |2000 |
| − | | | + | |12,99 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | | + | |L profiel |
| − | | | + | |30 |
| − | | | + | |30 |
| − | | | + | |3,0 |
| − | | | + | |2000 |
| − | | | + | |10,29 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | Staf plat | + | |Staf plat |
| − | | 20 | + | |20 |
| − | | | + | | |
| − | | 4,0 | + | |4,0 |
| − | | | + | |2000 |
| − | | | + | |5,49 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | Staf plat | + | |Staf plat |
| − | | 25 | + | |25 |
| − | | | + | | |
| − | | 4,0 | + | |4,0 |
| − | | | + | |2000 |
| − | | | + | |7,79 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | Staf | + | |Staf plat |
| − | | | + | |30 |
| − | | | + | | |
| − | | | + | |6,0 |
| − | | | + | |2000 |
| − | | | + | |9,59 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | Staf rond | + | |Staf rond |
| − | | | + | |6 |
| − | | | + | | |
| − | | | + | | |
| − | | | + | |2000 |
| − | | 2, | + | |2,49 |
|- | |- | ||
| − | | Praxis | + | |Praxis |
| − | | 30-12-2018 | + | |30-12-2018 |
| − | | Staf rond | + | |Staf rond |
| − | | | + | |8 |
| − | | | + | | |
| − | | | + | | |
| − | | | + | |2000 |
| − | | 3, | + | |3,59 |
| + | |} | ||
| + | |||
| + | ==Gasflessen== | ||
| + | Propaan e.d.: | ||
| + | * Jongeneel (Gasflessen.nl): Voorschoterweg 52a, 2235SH Valkenburg ZH | ||
| + | Argon/CO2 e.d.: | ||
| + | * Rijsbergen (Cartal / Fource Automotive): Weversbaan 6, 2352 BZ Leiderdorp | ||
| + | |||
| + | ==Wood suppliers== | ||
| + | This section regroups (hard)wood and veneer suppliers. | ||
| + | 'Pre-surfaced lumber' refers to the availability beside rough-sawn timber of wood that has been already jointed and planed ('geschaafd hout'). | ||
| + | {| class="wikitable" | ||
|- | |- | ||
| − | + | !Store/Supplier | |
| − | + | !City | |
| − | + | !Sortiment | |
| − | + | !Wood species | |
| − | + | !Pre-surfaced lumber ? | |
| − | + | !Prices | |
| − | + | !Quality | |
| − | + | !Comments | |
|- | |- | ||
| − | | | + | |[https://fibex.nl/ Fibex] |
| − | | | + | |Leiden (Warmond) |
| − | | | + | |Hardwood/Veneers |
| − | | | + | |Many |
| − | | | + | |No |
| − | | | + | |€€€€ |
| − | | | + | |★★★★ |
| − | | | + | |Specialty is veneers (largest stocks I have ever seen) but lot of hardwood available too. They have local and exotic species, including the good stuff (macassar ebony, palissander, walnut, etc). Beware, prices are extremely high (but so is the quality of the wood): veneers €15/20/100+BTW per m2 (oak/walnut/palissander), walnut 52mm €6k + BTW /m3, Oak €4.8k + BTW /m3 (prices from April 2023) |
|- | |- | ||
| − | | | + | |[https://www.houttotaal.nl/ Hout Totaal] |
| − | | | + | |Katwijk |
| − | | | + | |Hardwood |
| − | | | + | |Lots of oak, and some B-tier exotic species (mostly for outdoor stuff) |
| − | | | + | |Yes |
| − | | | + | |€€ |
| − | | | + | |★★/★★★ |
| − | | | + | |The place to go to buy affordable oak. Bonus point for the corner upstairs with smaller pieces (offcut from their projects, they build tables). Difficult to find longer clear-grain pieces. They have a huge planer/jointer, pretty sure they can surface timber of your choice. Super friendly people. |
|- | |- | ||
| − | | | + | |[https://www.noordmanhout.nl/ Noordman Hout] |
| − | | | + | |Leiden (Warmond) |
| − | | | + | |Softwood/Hardwood/Sheet goods |
| − | | | + | |? |
| − | | | + | |Yes |
| − | | | + | |?? |
| − | | | + | |**/*** |
| − | | | + | | Some people very knowledgable/helpful - but pays to come back the next day if you hit the wrong person |
|- | |- | ||
| − | | | + | |[https://www.fijnhout.nl/ Amsterdamsche Fijnhout] |
| − | | | + | |Amsterdam West |
| − | | | + | |Hardwood/Veneers |
| − | | | + | |Most. Wide variety including European and Exotic<br /> |
| − | | | + | |Yes |
| − | | | + | |€-€€€€ |
| − | | | + | |★★★★★ |
| − | | | + | |Wide selection of European and exotic woods. Indoors they have a range of planed woods in various sizes, outside they have a wider range of rough sawn timber. Lots of variety. Price varies depending on the wood species you go for. Poplar and Southern Yellow pine is very affordable, but some woods are up to 50K per m3.<br /> |
|- | |- | ||
| − | | | + | |[https://www.af.nl/ Arnhemse Fijnjouthandel] |
| − | | | + | |Arnhem |
| − | | | + | |Hardwood/Veneers |
| − | | | + | |Many, probably largest sortiment of the Netherlands |
| − | | | + | |Yes |
| − | | | + | |€, but €€€€ if you need a specific (large)size |
| − | | | + | |***** |
| − | | | + | |They have smaller pieces at very low prices (and even tiny ones - e.g. something exotic for turning a pen) for hobbyists with an extremely good selection upstairs. Both in lathe-sides bits and smaller bits for furnuture. Good fineer selection too - even in very small quantities. Very knowledgable and friendly. |
|- | |- | ||
| − | | | + | |[https://www.blackwalnut.nl/ Black Walnut BV] |
| − | | | + | |Numansdorp (south of Rotterdam) |
| − | | | + | |Hardwood |
| − | | | + | |Walnut, Cherry, Oak |
| − | | | + | |Yes |
| − | | | + | |€€€ |
| − | | 2000 | + | |?? (from their website, they sell furniture-grade stuff) |
| − | + | |Specialized in walnut (european and american), so it is quite expensive (2000-5000€/m3, excl BTW) | |
|- | |- | ||
| − | | | + | |[https://woodyworks.shop/ WoodyWorks] |
| − | | | + | |Helmond (near Eindhoven) |
| − | | | + | |Hardwood |
| − | | | + | |Many exotic species |
| − | | | + | |Yes |
| − | | | + | |€€-€€€ |
| − | | | + | |??? |
| − | | | + | |If you have an experience with this supplier, please add a comment here. |
| + | |} | ||
| + | Below are some Marktplaats sellers with interesting stuff (mainly veneer and smaller wood pieces that can be shipped) | ||
| + | {| class="wikitable" | ||
|- | |- | ||
| − | + | !Seller | |
| − | + | !Sortiment | |
| − | + | !Wood species | |
| − | + | !Prices | |
| − | + | !Quality | |
| − | + | !Comments | |
| − | |||
| − | |||
|- | |- | ||
| − | | | + | |[https://www.marktplaats.nl/u/hout/41590233/ Hout] |
| − | | | + | |Veneers |
| − | | | + | |Many |
| − | | | + | |€€ |
| − | | | + | |? |
| − | | | + | |Relatively affordable veneer, various lenghts |
| − | |||
| − | |||
|- | |- | ||
| − | | | + | |[https://www.marktplaats.nl/u/hout-fineer/1407482/ hout fineer] |
| − | + | |Veneers | |
| − | + | |Many | |
| − | | | + | |€ |
| − | | | + | |? |
| − | | | + | |If you only need shorter veneer pieces, this seller provides insane value |
| − | | | ||
| − | | | ||
|- | |- | ||
| − | | | + | |[https://www.marktplaats.nl/v/doe-het-zelf-en-verbouw/hout-en-planken/a1487050573-hout-voor-hobbyprojecten-noten-purperhart-padoek-etc Houtexclusief] |
| − | + | |Smaller pre-surfaced pieces | |
| − | | | + | |Walnut, purpleheat, padouk, ... |
| − | | | + | |€€ |
| − | | | + | |? |
| − | | | + | |It looks like an affordable option to get smaller stock pieces |
| − | | | ||
| − | |||
|} | |} | ||
| + | You can have also a look on the [https://www.houtplatform.nl/houthandels following website] which lists some (but not all) wood suppliers and sawmills in the Netherlands and in Belgium. | ||
| + | ==Overigen== | ||
| − | + | * Speciale slangen: http://www.slangenboer.nl/ | |
| − | *Speciale slangen: http://www.slangenboer.nl/ | + | * Speciale kleppen PVC: http://www.a2koi.nl/ |
| − | *Speciale kleppen PVC: http://www.a2koi.nl/ | + | * LED lampen: https://www.groothandelinled.nl/ |
| − | *LED lampen: https://www.groothandelinled.nl/ | ||
Versie van 1 mei 2024 om 19:29
Hier een lijst van leveranciers, materialen, prijzen en kwaliteit.
Inhoud
Winkels
Een verzameling winkels waar diverse "makergerelateerde" dingen te koop zijn. Deze informatie komt deels van de Lasersaur pagina.
| Winkel | Assortiment | Tips/Opmerkingen | NL? Shipcost? |
|---|---|---|---|
| Adafruit | Elektronica | Gericht op open source / open hardware. Veel goeie tutorials. | |
| Conrad | Elektronica | ||
| Elektronica Onderdelen Online | Elektronica | (Lasersaur:) Voor vrijwel alle gewone elektronica componenten | |
| Element14, Farnell Element14 | Elektronica | ||
| Hobby Elektronica | Elektronica | NL | |
| Kiwi Electronics | Elektronica | NL | |
| Reichelt | Elektronica-onderdelen, boutjes/moertjes etc, kantoorartikelen, pc-spul & raspi's, etc. | ||
| SparkFun | Elektronica | Gericht op open source / open hardware. Veel goeie tutorials. | |
| Bouwplastics.nl | Plastic | NL | |
| dokter-plexiglas.nl | Plastic | NL | |
| Kunstofshop | Plastic | (Lasersaur:) voor de aluminium-composiet en polycarbonaat buitenbekleding van de Saur | NL |
| Stappenmotor.nl | Materiaal voor CNC-machines | (Lasersaur:) voordelig alternatief voor een deel van de aluminium profielen. En stappenmotoren natuurlijk :) | NL |
| Misumi | Mechanische componenten | (Lasersaur:) mechanica en profielen die niet bij Stappenmotor te koop waren | |
| Nordt labs | Lasersaur-onderdelen | (Lasersaur:) de ontwikkelaars van de LaserSaur. Hier kochten we de speciale getande riemen | |
| Zirkzee te Leiden | Profiel & plaat | (Lasersaur:) Locale leverancier van aluminium platen | NL |
| Ali-Express | Van alles, maar o.a. Elektronica (goedkope Arduino clones, etc.) | Let op de reputatiescore van winkels. Als je onder de 22 euro bestelt, betaal je geen invoerrechten. | |
| Arcadewinkel.nl | Arcademachine-onderdelen, -kits | NL | |
| EOO voorheen Dick Best | Elektronica-onderdelen | Sinds nieuwe eigenaar duurder geworden | NL, standaard posttarief |
| Hackerstore | Elektronica-onderdelen | Was tip van Wesley. (N.B. er stond eerst "Hackershop", maar denk dat dit 'm is toch?) | NL |
| Baco army goods | Elektro(nica) spul, kampeerartikelen, legerdump | NL | |
| knutselaar.eu | Elektronica-onderdelen | goedkope, goede soldeerflux, startende shop, variabel assortiment | NL |
| techwinkel.nl | Bevestigingsmateriaal (bouten, moeren, etc.) | NL | |
| Easycomposites | Kunststoffen: epoxy, polyester, silicone, carbon, glasvezel, schuim, etc | Goede kwaliteit, en goede instructievideo's voor veel van hun materialen op Youtube. | UK (~4 dagen levertijd) |
| R&G | Kunststoffen: epoxy, polyester, silicone, carbon, glasvezel, schuim, etc | Iets voordeliger dan Easycomposites. Maar alleen kale informatie. | DE (~5 dagen levertijd) |
| Polyestershoppen.nl | Kunststoffen: epoxy, polyester, glasvezel etc | Fysieke winkel dichtbij (vlak bij HBM), bereid advies te geven. Geen fancy materialen. | NL |
| Poly Service | Kunststoffen: epoxy, polyester, silicone, carbon, glasvezel, schuim, etc | Groot assortiment; goede service/advies, fysieke winkels in Amsterdam en nabij Rotterdam. Wat duurder maar lagere bezorgkosten, levert heel snel. | NL |
Chemicals:
MARAWE GmbH & Co. KG Donaustaufer Straße 378 | Gebäude 64 + 46 93055 Regensburg | Germany Tel.: +49 941 29020439 | Fax: +49 941 29020593 E-Mail: info@marawe.de | Internet: www.marawe.de
MARAWE GmbH & Co. KGDonaustaufer Straße 378 | Gebäude 64 + 4693055 Regensburg | GermanyTel.: +49 941 29020439 | Fax: +49 941 29020593E-Mail: info@marawe.de | Internet: www.marawe.de
General suppliers in and around Leiden
Hartwijk and de Action (Langegracht, naast de parkeergarage en Politieburea) are very near to the space (walking distance). The Action has wood glue, some tools/nails/stuff and paint.
Hartwijk usually has a small cart you can borrow if you need to move things like very large 2.5x1.2 meter plywood, etc.
General suppliers - webstores
Roughly from good to bad:
* https://www.broederswebshop.nl/ - ventilation ducts, etc -- splendid service. * https://www.toolstation.nl - always delivered as agreed. * https://www.chronos.ltd.uk/ - great - but sometimes a bit expensive. * https://www.arceurotrade.co.uk - fast to arrive. always delivered as agreed. * https://www.rcm-machines.com/en/machine-accessories/attachments-mill/shell-end-mill-arbor/arbor-spacer/arbor-spacer,-boring-22-mm,-thickness-4-mm/rckdr224to soso * https://www.indi.nl/ - ok - but always over-asks & under-performs (by a bit). * https://www.hbm-machines.com/ -- generally OK for their (low) prices. But hassle not uncommon. * https://www.schleifscheibe-boetzow.de -- any size grinding wheels - for very reasonable prices.
to getting quite bad
* https://www.gereedschapcentrum.nl - bad experience -- 3 orders of plenty `in stock' items > 3 weeks delayed because `stock' in a row (2019). * https://www.toolsxl.nl - bad experience -- 2 orders of `in stock' items > 2 and > 9 weeks delayed.
Suppliers of tools
The below are online stores that sell tools, mostly woodworking tools, and will ship to the Netherlands.
- https://fine-tools.com/ - Dieter Schmid fine tools - Based in Berlin, excellent selection of woodworking tools from affordable, to extremely expensive.
- https://dictum.com/ - Dictum - Based in Munchen and Plattling, excellent selection of tools including woodworking, metalworking, leatherworking and more. They also have a limited availability of materials including specialist metals for knife making.
- https://sautershop.com - Sauter Shop - based in Herrsching, excellent selection of tools, mostly woodworking, but they also have cnc supplies.
- https://ecotools.nl - Ecotools - Based in Duurstede, wide selection of blades, bits, drills, screws, and the like. Not the best quality but good enough for most tasks. Their router bits are very good value for money.
- https://baptist.nl - Baptist - Based in Arnhem, has an actual physical shop you can visit, excellent range of tools from affordable own brand, to incredibly expensive. If you visit in person, staff are very knowledgeable and able to help. Also wide range of hardware such as hinges. Round the corner from Arnhem fijnhout (see below), so worth combining the two in one visit.
- ?? - Add your recommendations here.
If you're ordering from any of the above, do announce it on the mailing list, most of them have a free postage threshold, which is easy to reach if there's 2 or more of you ordering.
Suppliers of metals
| Company | City | Address | Wood | Metal | Electronics | Plumbing | Fabrics | Paints | Tools | Reputation | Comments | Recommender |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Warmteservice | Leiden | Flevoweg 39-B, 2318 BX Leiden | electrics | Yes | Yes | ★★★★ | 'Excellent advise' | ? | ||||
| W.P.Hartwijk & zn. B.V. | Leiden | Lammermarkt 3, Tegenover Molen de Valk, 2312CK Leiden | Yes | Yes | electrics | Yes | No | Yes | Yes | ★★★★ | 'Excellent advise' specialist tools & materials | ? |
| A.van Borselen & co | Leiden | Hooigracht 64, 2312 KV Leiden | ★★★★ | 'Excellent advise' specialist paints & materials | ? | |||||||
| Tool station | Leiden | Rooseveltstraat 49, 2321 BL Leiden | Some | Some | electrics | Yes | No | Yes | Yes | Lots | ? | |
| Oliehandel H van den Berg | Leiden | Rijndijk 232, 2331 AL Leiden | ★★★★ | Reliable, Knowledgable, Excelent advice, always has stock / alternatives | ? | |||||||
| Bouwhof | Zoetermeer | Edisonstraat 115, 2723 RT Zoetermeer | Yes | Electrics | Yes | Yes | Yes | ? | Enorme winkel met zeer breed assortiment. Begane grond is helemaal voor klussen. Mooie spullen. Alles van KWB en Proxxon. Maak ook heel veel dingen die je gewoon niet vindt bij de Praxis of Gamma. Zoals bijvoorbeeld een hele goede knutsel/makershoek! | Jan |
! Company ! City ! Address ! Wood ! Metal ! Electronics ! Plumbing ! Fabrics ! Paints ! Tools ! Reputation ! Comments ! Recommender | H. Pelgrim B.V. | Leiden | Rooseveltstraat 14, 2321 BM Leiden | | Yes, steel | | | | | | ★★★ | | Henry | Radio Twenthe | Den Haag | Stille Veerkade 11, 2512BE Den Haag | | | Yes | | | | | ★★★ | Good advice, various kinds of electronics parts | Jelle, Hans | Yesss Electrical | Leiden | Flevoweg 2b, 2318 BZ Leiden | | | Yes | | | | | ★★★ | | Henry, Anne | Zirkzee Profiel & Plaat BV | Leiden | Flevoweg 37, 2318 BX Leiden | | Yes, aluminium/brass/stainless steel | | | | | | ★★★ | | Henry, Anne | Two 4 Steel BV | Zwaag | De corantijn 18, 1689 AP Zwaag | | Yes, steel specialist. Very wide variety. webshop useful for precision ground 1.2510 (O1) toolsteel. | | | | | | ★★★★ | | Julia | Abrams / premium steel | Osnabruck, DE | | | Steel, C45U but also the nice stuff. | | | | | | ★★★★ | Very nice steel selector tool. | Dirkx
Metal profiles and where to find them
| Winkel | Datum | Type | Dikte 1 | Dikte 2 | Dikte Materiaal | Lengte | Prijs |
|---|---|---|---|---|---|---|---|
| Hornbach | 21-07-2018 | L profiel | 15 | 15 | 1,5 | 3000 | 11,50 |
| Hornbach | 21-07-2018 | L profiel | 20 | 20 | 3,0 | 3000 | 13,50 |
| Hornbach | 21-07-2018 | L profiel | 25 | 25 | 3,0 | 3000 | 14,25 |
| Hornbach | 21-07-2018 | L profiel | 30 | 30 | 3,0 | 3000 | 15,00 |
| Hornbach | 21-07-2018 | T profiel | 20 | 20 | 3,0 | 3000 | 11,95 |
| Hornbach | 21-07-2018 | T profiel | 25 | 25 | 3,5 | 3000 | 15,95 |
| Hornbach | 21-07-2018 | Buis Vierkant | 16 | 16 | 1,0 | 3000 | 8,95 |
| Hornbach | 21-07-2018 | Buis Vierkant | 20 | 20 | 1,5 | 3000 | 11,20 |
| Hornbach | 21-07-2018 | Buis Vierkant | 25 | 25 | 1,5 | 3000 | 13,85 |
| Hornbach | 21-07-2018 | Buis Rechthoekig | 40 | 20 | 2,0 | 3000 | 23,00 |
| Hornbach | 21-07-2018 | Buis Rechthoekig | 40 | 30 | 2,0 | 3000 | 22,95 |
| Hornbach | 21-07-2018 | U profiel | 20 | 16 | 2,0 | 3000 | 15,50 |
| Hornbach | 21-07-2018 | Staf Vierkant | 10 | 10 | 3000 | 8,90 | |
| Hornbach | 21-07-2018 | Staf Vierkant | 12 | 12 | 3000 | 11,90 | |
| Hornbach | 21-07-2018 | L profiel | 15 | 15 | 1,2 | 2000 | 8,05 |
| Hornbach | 21-07-2018 | L profiel | 20 | 20 | 3,0 | 2000 | 7,37 |
| Hornbach | 21-07-2018 | L profiel | 25 | 25 | 3,0 | 2000 | 9,20 |
| Hornbach | 21-07-2018 | L profiel | 30 | 30 | 3,0 | 2000 | 9,95 |
| Hornbach | 21-07-2018 | T profiel | 20 | 20 | 3,0 | 2000 | 8,75 |
| Hornbach | 21-07-2018 | T profiel | 25 | 25 | 3,0 | 2000 | 12,25 |
| Hornbach | 21-07-2018 | Platte Staf | 20 | 4,0 | 2000 | 5,50 | |
| Hornbach | 21-07-2018 | Platte Staf | 25 | 4,0 | 2000 | 7,00 | |
| Hornbach | 21-07-2018 | Platte Staf | 30 | 6,0 | 2000 | 9,70 | |
| Hornbach | 21-07-2018 | U profiel | 20 | 17 | 1,5 | 2000 | 6,55 |
| Hornbach | 21-07-2018 | Buis rechthoekig | 40 | 20 | 2,0 | 2000 | 15,00 |
| Hornbach | 21-07-2018 | Buis rechthoekig | 40 | 30 | 1,5 | 2000 | 19,06 |
| Hornbach | 21-07-2018 | Buis vierkant | 16 | 16 | 1,0 | 2000 | 6,95 |
| Hornbach | 21-07-2018 | Buis vierkant | 20 | 20 | 1,5 | 2000 | 9,25 |
| Hornbach | 21-07-2018 | Buis vierkant | 25 | 25 | 1,5 | 2000 | 10,42 |
| Praxis | 30-12-2018 | Buis rond | 12 | 1,0 | 1000 | 2,29 | |
| Praxis | 30-12-2018 | Buis rond | 16 | 1,0 | 1000 | 2,99 | |
| Praxis | 30-12-2018 | Buis rond | 22 | 1,2 | 1000 | 4,69 | |
| Praxis | 30-12-2018 | Buis rond | 22 | 1,2 | 1000 | 4,69 | |
| Praxis | 30-12-2018 | Buis vierkant | 16 | 1,0 | 1000 | 3,69 | |
| Praxis | 30-12-2018 | Buis vierkant | 20 | 1,5 | 1000 | 4,99 | |
| Praxis | 30-12-2018 | Buis vierkant | 25 | 1,5 | 1000 | ||
| Praxis | 30-12-2018 | L profiel | 20 | 20 | 3,0 | 1000 | 4,39 |
| Praxis | 30-12-2018 | L profiel | 25 | 25 | 3,0 | 1000 | 5,99 |
| Praxis | 30-12-2018 | Staf plat | 10 | 4,0 | 1000 | 2,29 | |
| Praxis | 30-12-2018 | Staf plat | 20 | 4,0 | 1000 | 3,69 | |
| Praxis | 30-12-2018 | Staf plat | 25 | 4,0 | 1000 | 4,19 | |
| Praxis | 30-12-2018 | Staf rond | 6 | 1000 | 1,49 | ||
| Praxis | 30-12-2018 | Staf rond | 8 | 1000 | 2,19 | ||
| Praxis | 30-12-2018 | Staf rond | 10 | 1000 | 3,39 | ||
| Praxis | 30-12-2018 | Staf rond | 12 | 1000 | |||
| Praxis | 30-12-2018 | Staf vierkant | 6 | 1000 | 2,19 | ||
| Praxis | 30-12-2018 | Buis vierkant | 16 | 1,0 | 2000 | 7,19 | |
| Praxis | 30-12-2018 | Buis vierkant | 20 | 1,5 | 2000 | 9,59 | |
| Praxis | 30-12-2018 | Buis vierkant | 30 | 1,5 | 2000 | 12,99 | |
| Praxis | 30-12-2018 | L profiel | 30 | 30 | 3,0 | 2000 | 10,29 |
| Praxis | 30-12-2018 | Staf plat | 20 | 4,0 | 2000 | 5,49 | |
| Praxis | 30-12-2018 | Staf plat | 25 | 4,0 | 2000 | 7,79 | |
| Praxis | 30-12-2018 | Staf plat | 30 | 6,0 | 2000 | 9,59 | |
| Praxis | 30-12-2018 | Staf rond | 6 | 2000 | 2,49 | ||
| Praxis | 30-12-2018 | Staf rond | 8 | 2000 | 3,59 |
Gasflessen
Propaan e.d.:
- Jongeneel (Gasflessen.nl): Voorschoterweg 52a, 2235SH Valkenburg ZH
Argon/CO2 e.d.:
- Rijsbergen (Cartal / Fource Automotive): Weversbaan 6, 2352 BZ Leiderdorp
Wood suppliers
This section regroups (hard)wood and veneer suppliers. 'Pre-surfaced lumber' refers to the availability beside rough-sawn timber of wood that has been already jointed and planed ('geschaafd hout').
| Store/Supplier | City | Sortiment | Wood species | Pre-surfaced lumber ? | Prices | Quality | Comments |
|---|---|---|---|---|---|---|---|
| Fibex | Leiden (Warmond) | Hardwood/Veneers | Many | No | €€€€ | ★★★★ | Specialty is veneers (largest stocks I have ever seen) but lot of hardwood available too. They have local and exotic species, including the good stuff (macassar ebony, palissander, walnut, etc). Beware, prices are extremely high (but so is the quality of the wood): veneers €15/20/100+BTW per m2 (oak/walnut/palissander), walnut 52mm €6k + BTW /m3, Oak €4.8k + BTW /m3 (prices from April 2023) |
| Hout Totaal | Katwijk | Hardwood | Lots of oak, and some B-tier exotic species (mostly for outdoor stuff) | Yes | €€ | ★★/★★★ | The place to go to buy affordable oak. Bonus point for the corner upstairs with smaller pieces (offcut from their projects, they build tables). Difficult to find longer clear-grain pieces. They have a huge planer/jointer, pretty sure they can surface timber of your choice. Super friendly people. |
| Noordman Hout | Leiden (Warmond) | Softwood/Hardwood/Sheet goods | ? | Yes | ?? | **/*** | Some people very knowledgable/helpful - but pays to come back the next day if you hit the wrong person |
| Amsterdamsche Fijnhout | Amsterdam West | Hardwood/Veneers | Most. Wide variety including European and Exotic |
Yes | €-€€€€ | ★★★★★ | Wide selection of European and exotic woods. Indoors they have a range of planed woods in various sizes, outside they have a wider range of rough sawn timber. Lots of variety. Price varies depending on the wood species you go for. Poplar and Southern Yellow pine is very affordable, but some woods are up to 50K per m3. |
| Arnhemse Fijnjouthandel | Arnhem | Hardwood/Veneers | Many, probably largest sortiment of the Netherlands | Yes | €, but €€€€ if you need a specific (large)size | ***** | They have smaller pieces at very low prices (and even tiny ones - e.g. something exotic for turning a pen) for hobbyists with an extremely good selection upstairs. Both in lathe-sides bits and smaller bits for furnuture. Good fineer selection too - even in very small quantities. Very knowledgable and friendly. |
| Black Walnut BV | Numansdorp (south of Rotterdam) | Hardwood | Walnut, Cherry, Oak | Yes | €€€ | ?? (from their website, they sell furniture-grade stuff) | Specialized in walnut (european and american), so it is quite expensive (2000-5000€/m3, excl BTW) |
| WoodyWorks | Helmond (near Eindhoven) | Hardwood | Many exotic species | Yes | €€-€€€ | ??? | If you have an experience with this supplier, please add a comment here. |
Below are some Marktplaats sellers with interesting stuff (mainly veneer and smaller wood pieces that can be shipped)
| Seller | Sortiment | Wood species | Prices | Quality | Comments |
|---|---|---|---|---|---|
| Hout | Veneers | Many | €€ | ? | Relatively affordable veneer, various lenghts |
| hout fineer | Veneers | Many | € | ? | If you only need shorter veneer pieces, this seller provides insane value |
| Houtexclusief | Smaller pre-surfaced pieces | Walnut, purpleheat, padouk, ... | €€ | ? | It looks like an affordable option to get smaller stock pieces |
You can have also a look on the following website which lists some (but not all) wood suppliers and sawmills in the Netherlands and in Belgium.
Overigen
- Speciale slangen: http://www.slangenboer.nl/
- Speciale kleppen PVC: http://www.a2koi.nl/
- LED lampen: https://www.groothandelinled.nl/
