Abene Metal Mill / Freesbank: verschil tussen versies

Versie van 9 dec 2017 om 18:21

See github for documentation. [1]

Not yet operational Unresolved issues are:

. Water soluble coolant (artikel 01345 at HBM)
. ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit.
. Spanner for the easy-change ISO 40 taper/collet.
. Small spanner for the taper bolt.
. Set of collets for ISO 40.

Details on github: [2]

. Main drive gearbox, spindle gearbox, drive gearbox on the left.
1. . Replaced with Hykrol HLP ISO-VG 100 (ISO 100 hydraulic oil), 2017-11-19. 5L was about sufficient all 3 gearboxes.
. Overarm bearing
1. . Emptied and cleaned 2017-11-19. Not yet replaced.
. Sideways
1. . Emptied and cleaned 2017-11-12. Not yet replaced.
. Kneejacking screw
1. . Emptied and cleaned 2017-11-29. Replaced by ISO 46 hydraulic oi.l 2017-11-29.
. Headstock and motor bearings.
1. . Emptied and cleaned. 2017-11-29. Replaced by ISO 100 hydraulic oil. 2017-11-29.

@@ Regel 3: / Regel 3: @@
 See github for documentation. [https://github.com/MakerSpaceLeiden/AbeneMill/]
-Not yet operational
+## Status ##
+Not yet operational Unresolved issues are:
+#. Mounting of pump
+#. Filling of reservoir with the right mix
+#. Z axis blocks at 80%.
+## To procure/find ##
+#. Water soluble coolant (artikel 01345 at HBM)
+#. ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit.
+#. Spanner for the easy-change ISO 40 taper/collet.
+#. Small spanner for the taper bolt.
+#. Set of collets for ISO 40.
 ## Lubrication History ##