TIG Welder / Lasapparaat: verschil tussen versies
(→TIG 200P AC/DC) |
(→If it beeps / Auto turn-off =) |
||
| Regel 19: | Regel 19: | ||
# Switch the TIG welder off | # Switch the TIG welder off | ||
| − | == If it beeps / Auto turn-off | + | == If it beeps / Auto turn-off == |
If the unit detects gas buildup when not in use; -or- if the unit is powered but not used for over 2 hours - the ACNode will switch the power off. It will then start beeping until someone closes the main valve on top of the bottle (or the bottle runs empty). | If the unit detects gas buildup when not in use; -or- if the unit is powered but not used for over 2 hours - the ACNode will switch the power off. It will then start beeping until someone closes the main valve on top of the bottle (or the bottle runs empty). | ||
Versie van 29 sep 2024 om 22:06
Inhoud
TIG 200P AC/DC
Enabling the TIG Welder
The welder is behind a ACNode that also tracks gas-bottle swaps and keeps some statistics on use (it does not yet automatically deduct the gas from your account).
To turn on
- Swipe tag
- Switch the TIG welder on
- Open the big valve on top of the bottle
- Go wild welding
To turn off
- Close the big valve on top of the bottle
- Switch the TIG welder off
If it beeps / Auto turn-off
If the unit detects gas buildup when not in use; -or- if the unit is powered but not used for over 2 hours - the ACNode will switch the power off. It will then start beeping until someone closes the main valve on top of the bottle (or the bottle runs empty).
To stop it from beeping - close the valve on top of the bottle. And press the 'OK' button on the screen when you are done.
Main Specifications
- Input Single phase, 240VAC, 24A Max
- Welding current: up to 185A at 20% DC (5.8 KVA)
Manual
Schematics
