CNC zero locator: verschil tussen versies
| (5 tussenliggende versies door 2 gebruikers niet weergegeven) | |||
| Regel 1: | Regel 1: | ||
| + | [[Category:Tools]][[Category:Measuring tools]][[Category:Wood working tools]][[Category:CNC machines]] | ||
| + | |||
| + | [[Bestand:CNC_zero_point_locator.jpeg|300px|thumb|right|alt=CNC zero point locator|CNC zero point locator|CNC zero point locator]] | ||
| + | [[Bestand:CNC_zero_point_locator_2.jpeg|300px|thumb|right|alt=CNC zero point locator|CNC zero point locator|CNC zero point locator]] | ||
| + | |||
For easy, but rough, estimation of your zero point you can use this jig to measure an offset from two sides of your workpiece. | For easy, but rough, estimation of your zero point you can use this jig to measure an offset from two sides of your workpiece. | ||
A bar with indents per 1 or 5cm helps you for placing the guide. The centre hole is 10mm in diameter, keeps this in mind with larger bits! | A bar with indents per 1 or 5cm helps you for placing the guide. The centre hole is 10mm in diameter, keeps this in mind with larger bits! | ||
| − | |||
| − | |||
= Location = | = Location = | ||
| Regel 14: | Regel 17: | ||
''The source file can be found below.'' Please remake the tool if you break it! | ''The source file can be found below.'' Please remake the tool if you break it! | ||
| − | [[Bestand:CNC_zero_locator.svg|here]] | + | [[Bestand:CNC_zero_locator.svg|400px|here]] |
= History = | = History = | ||
| Regel 24: | Regel 27: | ||
| 2023-10-29 || Tool created/cut by Jelle | | 2023-10-29 || Tool created/cut by Jelle | ||
|} | |} | ||
| − | |||
Huidige versie van 11 nov 2024 om 23:00
For easy, but rough, estimation of your zero point you can use this jig to measure an offset from two sides of your workpiece.
A bar with indents per 1 or 5cm helps you for placing the guide. The centre hole is 10mm in diameter, keeps this in mind with larger bits!
Location
It's stored behind the PC that is controlling the CNC table.
Maintenance
The source file can be found below. Please remake the tool if you break it!
History
| Date | Description |
|---|---|
| 2023-10-29 | Tool created/cut by Jelle |
