PowerNodeBlue-bringup: verschil tussen versies
(→Initial Bringup / checkout) |
(→Initial Bringup / checkout) |
||
| Regel 11: | Regel 11: | ||
## Check 3v3 and 5v power; check red LED | ## Check 3v3 and 5v power; check red LED | ||
## check detection driver | ## check detection driver | ||
| + | # PoE powering | ||
| + | ## Place solder bridges Vpwr, V5 to VPOE/VPOE5 in Source field | ||
| + | ## Do not place the Vpwr/5V bridges in the PoE field - these should be better labeled: e.g. have an 'OFF' text added to them like the one just above. | ||
| + | # ESP32 | ||
| + | ## Solder in the ESP32 | ||
| + | |||
| + | |||
| + | == Improvements == | ||
| + | |||
| + | # Add the word 'OFF' to the labels of all bridges in the PoE field (and not just the top one) | ||
Versie van 4 feb 2025 om 14:29
15 units; 25/01/23 fab date.
Initial Bringup / checkout
Board 001:
- Checked soldering/board as is.
- Plug in USB-C
- Check 3v3 and 5v power; check red LED
- check detection driver
- PoE powering
- Place solder bridges Vpwr, V5 to VPOE/VPOE5 in Source field
- Do not place the Vpwr/5V bridges in the PoE field - these should be better labeled: e.g. have an 'OFF' text added to them like the one just above.
- ESP32
- Solder in the ESP32
Improvements
- Add the word 'OFF' to the labels of all bridges in the PoE field (and not just the top one)
