Maintenance Day Spring 2025: verschil tussen versies
Regel 1: | Regel 1: | ||
[[Category:Active projects]] | [[Category:Active projects]] | ||
=Intro= | =Intro= | ||
− | |||
We have a maintenance day planned for 15th of March 2025. This is a chance to give some of our machines some TLC. | We have a maintenance day planned for 15th of March 2025. This is a chance to give some of our machines some TLC. | ||
=Todo List= | =Todo List= | ||
− | + | ==Wood hand tools== | |
− | ==Wood hand tools == | ||
* Sharpen chisels | * Sharpen chisels | ||
Regel 12: | Regel 10: | ||
==Metal Lathe== | ==Metal Lathe== | ||
+ | |||
* Chuck/spindle is slightly out of alignment. Needs tramming | * Chuck/spindle is slightly out of alignment. Needs tramming | ||
* Gear box sounds like someone dropped a spanner in there. | * Gear box sounds like someone dropped a spanner in there. | ||
Regel 24: | Regel 23: | ||
* Install new X axis DRO scale if it hasn't already been | * Install new X axis DRO scale if it hasn't already been | ||
− | == Metal chop saw == | + | ==Metal chop saw== |
* Use the megger to check that there is no leakage to earth or between the coils | * Use the megger to check that there is no leakage to earth or between the coils | ||
Regel 32: | Regel 31: | ||
* Aux table and outfeed table need some TLC | * Aux table and outfeed table need some TLC | ||
− | == Fan == | + | ==Fan== |
* Reinstall timer / auto-off box | * Reinstall timer / auto-off box | ||
− | == Bambu Printer == | + | ==Bambu Printer== |
* The silica pellets in the ams of the Bambuprinter are cleaned, but it sucks to do so and can easily damage the machine. A small amount of new pellets have been added to keep the dehumidifier going, but we need to find an alternative. | * The silica pellets in the ams of the Bambuprinter are cleaned, but it sucks to do so and can easily damage the machine. A small amount of new pellets have been added to keep the dehumidifier going, but we need to find an alternative. | ||
Regel 42: | Regel 41: | ||
* MThe poop chute was not attached with tape anymore, which made a small mess at the back. Maybe we could magnetize the chute? | * MThe poop chute was not attached with tape anymore, which made a small mess at the back. Maybe we could magnetize the chute? | ||
− | == Power tools with a 220v cord == | + | ==Power tools with a 220v cord== |
+ | |||
* check for broken plugs and power cords | * check for broken plugs and power cords | ||
* possibly Meggen | * possibly Meggen | ||
− | == Space door == | + | ==Space door== |
+ | |||
* see how we can improve that / get a new spring from Hartwijk and put it in the lock box | * see how we can improve that / get a new spring from Hartwijk and put it in the lock box | ||
− | == Lasersaur == | + | ==Lasersaur== |
+ | |||
* Recalibrate - currently not cutting through 3mm multiplex. | * Recalibrate - currently not cutting through 3mm multiplex. | ||
− | == Hand Towels == | + | ==Hand Towels== |
+ | |||
* Sew a loop onto the hand towels that don't have a loop, making them easier to hang on a hook. | * Sew a loop onto the hand towels that don't have a loop, making them easier to hang on a hook. | ||
+ | |||
+ | ==Grease the CNC Z axis<br />== | ||
+ | I recently did grease the X and both Y axes, but did not do the Z axis because that is more difficult. I order to access the bearing, the end-stop sensor needs to be removed: both the steel element and the sensor must be unscrewed before the blue cover can come off. After snapping loose the cover, the grease notch becomes accessible. This inconvenient accessibility was an oversight when rebuilding the CNC.<br />I am not present on the maintenance day, if this does not get done I'll do it when I am back (Maarten). |
Versie van 12 mrt 2025 om 23:18
Inhoud
[verbergen]Intro
We have a maintenance day planned for 15th of March 2025. This is a chance to give some of our machines some TLC.
Todo List
Wood hand tools
- Sharpen chisels
Metal Lathe
- Chuck/spindle is slightly out of alignment. Needs tramming
- Gear box sounds like someone dropped a spanner in there.
- Carriage lock doesn't work
- Align tailstock
- Lubricate (and not with beer) - use ISO68, we have some in the lube cupboard
- check everything around the cooling water/cooling mist
Abene Mill
- Z axis DRO drifts when moving table
- Install new X axis DRO scale if it hasn't already been
Metal chop saw
- Use the megger to check that there is no leakage to earth or between the coils
Table Saw
- Aux table and outfeed table need some TLC
Fan
- Reinstall timer / auto-off box
Bambu Printer
- The silica pellets in the ams of the Bambuprinter are cleaned, but it sucks to do so and can easily damage the machine. A small amount of new pellets have been added to keep the dehumidifier going, but we need to find an alternative.
- There is not a good space to store the empty filament rolls. I'd suggest making a space where we can store at least 8 empty rolls, with clear labeling.
- MThe poop chute was not attached with tape anymore, which made a small mess at the back. Maybe we could magnetize the chute?
Power tools with a 220v cord
- check for broken plugs and power cords
- possibly Meggen
Space door
- see how we can improve that / get a new spring from Hartwijk and put it in the lock box
Lasersaur
- Recalibrate - currently not cutting through 3mm multiplex.
Hand Towels
- Sew a loop onto the hand towels that don't have a loop, making them easier to hang on a hook.
Grease the CNC Z axis
I recently did grease the X and both Y axes, but did not do the Z axis because that is more difficult. I order to access the bearing, the end-stop sensor needs to be removed: both the steel element and the sensor must be unscrewed before the blue cover can come off. After snapping loose the cover, the grease notch becomes accessible. This inconvenient accessibility was an oversight when rebuilding the CNC.
I am not present on the maintenance day, if this does not get done I'll do it when I am back (Maarten).