Node Table saw: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 12: Regel 12:
  
 
Gebaseerd op een [[Powernode_1.1]] bordje
 
Gebaseerd op een [[Powernode_1.1]] bordje
 +
 +
= Log =
 +
 +
'''
 +
Wed Jan 22 19:45:22 CET 2020 ac/log/tablesaw tablesaw {"node":"tablesaw","machine":"tablesaw","maxMqtt":768,"id":"44d26ea4ae30","ip":"192.168.6.213","net":"UTP","mac":"30:AE:A4:6E:D2:47","beat":1579718723,"alive-uptime":539106,"approve":8,"deny":0,"requests":8,"cache_hit":8,"cache_miss":0,"mqtt_reconnects":1,"loop_rate":9372.537,"coreTemp":51.66667,"heap_free":200216,"rfid_scans":8,"rfid_misses":52,"state":"Waiting for card","powered_time":425830,"extract_time":121568,"running_time":60022,"idle_poweroff":1,"fan_poweroff":21,"bad_poweroff":0,"current":0.000175,"opto":"low","triac":0,"relay":0,"ota":true}
 +
'''

Versie van 26 jan 2020 om 16:18

NodeTableSawOutside.jpeg

PoE powered Node on Ethernet voor de Circelzaag.


Werkt samen met de SafetyContactor; dus aan en uit zetten met de normale rode/groene knoppen.

OPTO1 wordt gebruikt om spanning via de SafetyContactor te detecteren; het relay onderbreekt de interlock kring van diezelfde SafetyContactor.

Electronics

Gebaseerd op een Powernode_1.1 bordje

Log

Wed Jan 22 19:45:22 CET 2020 ac/log/tablesaw tablesaw {"node":"tablesaw","machine":"tablesaw","maxMqtt":768,"id":"44d26ea4ae30","ip":"192.168.6.213","net":"UTP","mac":"30:AE:A4:6E:D2:47","beat":1579718723,"alive-uptime":539106,"approve":8,"deny":0,"requests":8,"cache_hit":8,"cache_miss":0,"mqtt_reconnects":1,"loop_rate":9372.537,"coreTemp":51.66667,"heap_free":200216,"rfid_scans":8,"rfid_misses":52,"state":"Waiting for card","powered_time":425830,"extract_time":121568,"running_time":60022,"idle_poweroff":1,"fan_poweroff":21,"bad_poweroff":0,"current":0.000175,"opto":"low","triac":0,"relay":0,"ota":true}