VOIP experiment: verschil tussen versies
Naar navigatie springen
Naar zoeken springen
Geen bewerkingssamenvatting |
|||
| (2 tussenliggende versies door dezelfde gebruiker niet weergegeven) | |||
| Regel 14: | Regel 14: | ||
# Configure: 25 Hz, 90 volt, sinoid for ring signal (under Voice->Region) | # Configure: 25 Hz, 90 volt, sinoid for ring signal (under Voice->Region) | ||
Not yet working - pulse based dial out | Not yet working - pulse based dial out (and, for now, we're not working on that - as it also means costs/billing). | ||
= Getting the phone to work = | = Getting the phone to work = | ||
| Regel 22: | Regel 22: | ||
= Still to do = | = Still to do = | ||
# Move SPA into patch/data enclosure | # <strike> Move SPA into patch/data enclosure</strike> | ||
# Find place for phone | # <strike> Find place for phone - e.g. wall mounted, etc.</strike> | ||
# <strike> Find historic wall socket</strike> (20 cents at the neighbours) | # <strike> Find historic wall socket</strike> (20 cents at the neighbours)</strike> | ||
# Run two-pair phone cable from SPA to wall socket (or use exacting cat5 cabling) | # <strike> Run two-pair phone cable from SPA to wall socket (or use exacting cat5 cabling)</strike> | ||
# Find one of those ancient loud bells to mount on the workshop side | # Find one of those ancient loud bells to mount on the workshop side | ||
Huidige versie van 13 jun 2025 13:29
071-5690707
Setup
Setup for a simple VoIP experiment:
- Account with cheapconnect
- KYC authentication (for now via Dirk's company) to get a Leiden trunk number
- SPA112 configured with the trunk
- Password to Cisco SPA112 in the usual place
- POTS on port 1 - number: +31715690707, 071-5690707 of 5690707
- Mangement interface op http://192.168.6.201/
- Configure: 25 Hz, 90 volt, sinoid for ring signal (under Voice->Region)
Not yet working - pulse based dial out (and, for now, we're not working on that - as it also means costs/billing).
Getting the phone to work
Connect B and EB (Extra Bel) -- thanks to HansS for the hint !
Still to do
Move SPA into patch/data enclosureFind place for phone - e.g. wall mounted, etc.Find historic wall socket(20 cents at the neighbours)Run two-pair phone cable from SPA to wall socket (or use exacting cat5 cabling)- Find one of those ancient loud bells to mount on the workshop side