Node Tussendeur: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Nieuwe pagina aangemaakt met 'Category:ACNodeCategory:RunningTheSpaceDocs PoE powered Node on Ethernet voor de tussendeur in de hal. miniatuur = Electr...')
 
 
(13 tussenliggende versies door 3 gebruikers niet weergegeven)
Regel 1: Regel 1:
[[Category:ACNode]][[Category:RunningTheSpaceDocs]]
+
[[Category:Nodes & network devices]]
 +
PoE powered Node on Ethernet voor de tussendeur in de hal.
 +
 
 +
Current IP address: 192.168.6.30 / 30:AE:A4:13:E9:3C and connected to port 2 of the patch panel
  
PoE powered Node on Ethernet voor de tussendeur in de hal.
+
Has debugging on telnet, MQTT, syslog and a web interface: http://192.168.6.30:
  
[[Bestand: TussendeurNode.jog|miniatuur]]
+
[[Bestand:TussendeurNode-log.png|320px]]
  
 
= Electronics =
 
= Electronics =
  
Todo
+
Mosfet om een Solenoide in de deur aan te sturen. Deze draait op de 48V van de PoE.
 +
 
 +
Runs on the [[Powernode 1.1|PowerNodeV11]] board. It has a separate splitter to extract a higher voltage/current (12V) for the solenoid.
 +
 
 +
= History =
 +
 
 +
Rebuild sometime 2016 and upgraded early 2018 with the 1.1 batch (yellow boards)
 +
 
 +
Firmware last updated 2022/2/19 with https://github.com/MakerSpaceLeiden/AccesSystem/releases/tag/cache-fix-2022-02-19-1.00 - to fix caching and a range of errors found by Duco when using the Arduino rather than the VisualStudio setup.

Huidige versie van 16 nov 2024 om 23:12

PoE powered Node on Ethernet voor de tussendeur in de hal.

Current IP address: 192.168.6.30 / 30:AE:A4:13:E9:3C and connected to port 2 of the patch panel

Has debugging on telnet, MQTT, syslog and a web interface: http://192.168.6.30:

TussendeurNode-log.png

Electronics

Mosfet om een Solenoide in de deur aan te sturen. Deze draait op de 48V van de PoE.

Runs on the PowerNodeV11 board. It has a separate splitter to extract a higher voltage/current (12V) for the solenoid.

History

Rebuild sometime 2016 and upgraded early 2018 with the 1.1 batch (yellow boards)

Firmware last updated 2022/2/19 with https://github.com/MakerSpaceLeiden/AccesSystem/releases/tag/cache-fix-2022-02-19-1.00 - to fix caching and a range of errors found by Duco when using the Arduino rather than the VisualStudio setup.