Node Tussendeur: verschil tussen versies
| (11 tussenliggende versies door 2 gebruikers niet weergegeven) | |||
| Regel 1: | Regel 1: | ||
| − | [[Category: | + | [[Category:Nodes & network devices]] |
PoE powered Node on Ethernet voor de tussendeur in de hal. | PoE powered Node on Ethernet voor de tussendeur in de hal. | ||
| − | [[Bestand: TussendeurNode. | + | Current IP address: 192.168.6.30 / 30:AE:A4:13:E9:3C and connected to port 2 of the patch panel |
| + | |||
| + | Has debugging on telnet, MQTT, syslog and a web interface: http://192.168.6.30: | ||
| + | |||
| + | [[Bestand:TussendeurNode-log.png|320px]] | ||
= Electronics = | = Electronics = | ||
Mosfet om een Solenoide in de deur aan te sturen. Deze draait op de 48V van de PoE. | Mosfet om een Solenoide in de deur aan te sturen. Deze draait op de 48V van de PoE. | ||
| + | |||
| + | Runs on the [[Powernode 1.1|PowerNodeV11]] board. It has a separate splitter to extract a higher voltage/current (12V) for the solenoid. | ||
| + | |||
| + | = History = | ||
| + | |||
| + | Rebuild sometime 2016 and upgraded early 2018 with the 1.1 batch (yellow boards) | ||
| + | |||
| + | Firmware last updated 2022/2/19 with https://github.com/MakerSpaceLeiden/AccesSystem/releases/tag/cache-fix-2022-02-19-1.00 - to fix caching and a range of errors found by Duco when using the Arduino rather than the VisualStudio setup. | ||
Huidige versie van 16 nov 2024 om 23:12
PoE powered Node on Ethernet voor de tussendeur in de hal.
Current IP address: 192.168.6.30 / 30:AE:A4:13:E9:3C and connected to port 2 of the patch panel
Has debugging on telnet, MQTT, syslog and a web interface: http://192.168.6.30:
Electronics
Mosfet om een Solenoide in de deur aan te sturen. Deze draait op de 48V van de PoE.
Runs on the PowerNodeV11 board. It has a separate splitter to extract a higher voltage/current (12V) for the solenoid.
History
Rebuild sometime 2016 and upgraded early 2018 with the 1.1 batch (yellow boards)
Firmware last updated 2022/2/19 with https://github.com/MakerSpaceLeiden/AccesSystem/releases/tag/cache-fix-2022-02-19-1.00 - to fix caching and a range of errors found by Duco when using the Arduino rather than the VisualStudio setup.
