Sjabloon:Imperial: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
 
(9 tussenliggende versies door 2 gebruikers niet weergegeven)
Regel 1: Regel 1:
<noInclude>[[Category:Gereedschapssjablonen]]</noinclude>
+
<noInclude>[[Category:Wiki templates & sjablonen]]</noinclude>
<div style="margin:6px; padding:6px">
+
<includeonly>[[Category:Imperial tools]]</includeonly>
<div style="padding:12px; border:2px solid red">
+
 
[[Category:Imperial]]
+
<div style="margin:12px; padding:12px; border:2px solid red; max-width:max-content; float:top;">
 
[[Bestand:imperial-label.png|80px|God save the queen!]]
 
[[Bestand:imperial-label.png|80px|God save the queen!]]
 
'''WARNING''': Imperial tools have slightly different sizes than Metric ones.  
 
'''WARNING''': Imperial tools have slightly different sizes than Metric ones.  
  
Using the wrong one will often damage the bolt, nut or whatever you are working on. See this [[:Categorie:Imperial|list for all the imperial tools]] we have.
+
Using the wrong one will often damage the bolt, nut or whatever you are working on. See this [[:Categorie:Imperial tools|list for all the imperial tools]] we have.
 
 
Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.  
 
  
Be especially careful with the ''close friends'', such as
 
sizes like 5/8inch and 16mm. Although the difference is 0.13mm - '''you will ruin''' (or usually just crack) a collet or similar..
 
  
</div>
+
Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.<br />
 +
Be especially careful with the ''close friends'', such as sizes like 5/8inch and 16mm;<br />
 +
although the difference is 0.13mm - '''you will ruin''' (or usually just crack) a collet or similar..
 
</div>
 
</div>

Huidige versie van 17 nov 2024 om 22:06


God save the queen! WARNING: Imperial tools have slightly different sizes than Metric ones.

Using the wrong one will often damage the bolt, nut or whatever you are working on. See this list for all the imperial tools we have.


Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.
Be especially careful with the close friends, such as sizes like 5/8inch and 16mm;
although the difference is 0.13mm - you will ruin (or usually just crack) a collet or similar..