Jigs (wood): verschil tussen versies

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
Nieuwe pagina aangemaakt met 'Catégorie:Wood This page regroups information about custom made jigs for various machines of the wood workshop = Table Saw jigs = == Rod maker (table saw lat...'
 
Geen bewerkingssamenvatting
Regel 1: Regel 1:
[[Catégorie:Wood]]
[[Catégorie:Wood]]
This page regroups information about custom made jigs for various machines of the wood workshop
This page regroups information about custom made jigs for various machines of the wood workshop.


= Table Saw jigs =  
= Table Saw jigs =  
== Rod maker (table saw lathe) ==
== Rod maker (table saw lathe) ==
The purpose of this jig is to create straight, cylindrical rods of wood, between ~20mm and ~90mm diameter, up to 65 cm in length, i.e. longer than what you can do with the wood lathe.
=== Material preparation ===
=== Table saw preaparation
In order to operate the jig, it is necessary to remove the riving knife of the table saw, behind the saw blade. This can be done with a 19mm wrench.
=== Jig setup ===
== Picture frame jig ==
== Picture frame jig ==
== Tapering jig ==
== Tapering jig ==

Versie van 8 apr 2024 09:37

Catégorie:Wood This page regroups information about custom made jigs for various machines of the wood workshop.

Table Saw jigs

Rod maker (table saw lathe)

The purpose of this jig is to create straight, cylindrical rods of wood, between ~20mm and ~90mm diameter, up to 65 cm in length, i.e. longer than what you can do with the wood lathe.

Material preparation

=== Table saw preaparation In order to operate the jig, it is necessary to remove the riving knife of the table saw, behind the saw blade. This can be done with a 19mm wrench.

Jig setup

Picture frame jig

Tapering jig