Node Tussendeur: verschil tussen versies
| Regel 1: | Regel 1: | ||
[[Category:ACNode]] | [[Category:ACNode]] | ||
| − | [[Categorie: | + | [[Categorie:Network devices & nodes]] |
PoE powered Node on Ethernet voor de tussendeur in de hal. | PoE powered Node on Ethernet voor de tussendeur in de hal. | ||
Versie van 8 jul 2024 om 18:30
PoE powered Node on Ethernet voor de tussendeur in de hal.
Current IP address: 192.168.6.30 / 30:AE:A4:13:E9:3C and connected to port 2 of the patch panel
Has debugging on telnet, MQTT, syslog and a web interface: http://192.168.6.30:
Electronics
Mosfet om een Solenoide in de deur aan te sturen. Deze draait op de 48V van de PoE.
Runs on the PowerNodeV11 board. It has a separate splitter to extract a higher voltage/current (12V) for the solenoid.
History
Rebuild sometime 2016 and upgraded early 2018 with the 1.1 batch (yellow boards)
Firmware last updated 2022/2/19 with https://github.com/MakerSpaceLeiden/AccesSystem/releases/tag/cache-fix-2022-02-19-1.00 - to fix caching and a range of errors found by Duco when using the Arduino rather than the VisualStudio setup.
