Abene Metal Mill / Freesbank

1. Abene VHF3 Metaalfrees machine #

See github for documentation. [1]

1. 1. Status ##

Not yet operational Unresolved issues are:

1. . Mounting of pump
2. . Filling of reservoir with the right mix
3. . Z axis blocks at 80%.

1. 1. To procure/find ##

1. . Water soluble coolant (artikel 01345 at HBM)
2. . ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit (misschien HBM 02594)
3. . Spanner for the easy-change ISO 40 taper/collet.
4. . Small spanner for the taper bolt.
5. . Set of collets for ISO 40.

1. 1. Lubrication History ##

Details on github: [2]

1. . Main drive gearbox, spindle gearbox, drive gearbox on the left.
   1. . Replaced with Hykrol HLP ISO-VG 100 (ISO 100 hydraulic oil), 2017-11-19. 5L was about sufficient all 3 gearboxes.
2. . Overarm bearing
   1. . Emptied and cleaned 2017-11-19. Not yet replaced.
3. . Sideways
   1. . Emptied and cleaned 2017-11-12. Not yet replaced.
4. . Kneejacking screw
   1. . Emptied and cleaned 2017-11-29. Replaced by ISO 46 hydraulic oi.l 2017-11-29.
5. . Headstock and motor bearings.
   1. . Emptied and cleaned. 2017-11-29. Replaced by ISO 100 hydraulic oil. 2017-11-29.