Abene Metal Mill / Freesbank: verschil tussen versies
| Regel 1: | Regel 1: | ||
| − | + | = Abene VHF3 Metaalfrees machine = | |
See github for documentation. [https://github.com/MakerSpaceLeiden/AbeneMill/] | See github for documentation. [https://github.com/MakerSpaceLeiden/AbeneMill/] | ||
| − | + | = Status = | |
Not yet operational Unresolved issues are: | Not yet operational Unresolved issues are: | ||
| Regel 11: | Regel 11: | ||
#. Z axis blocks at 80%. | #. Z axis blocks at 80%. | ||
| − | + | = To procure/find = | |
| − | #. Water soluble coolant (artikel 01345 at HBM) | + | #. Water soluble coolant (artikel 01345 at HBM) - minstens 2 liter bij 1:20 verdunning. |
#. ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit (misschien HBM 02594) | #. ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit (misschien HBM 02594) | ||
#. Spanner for the easy-change ISO 40 taper/collet. | #. Spanner for the easy-change ISO 40 taper/collet. | ||
| Regel 19: | Regel 19: | ||
#. Set of collets for ISO 40. | #. Set of collets for ISO 40. | ||
| − | ## Lubrication History | + | Advies van Abene: |
| + | |||
| + | # Q8 Goya NT68 (gear oil) spindle and feed gear box) | ||
| + | # For everything else, Q8 Wagner NT68 (Slideway lube) | ||
| + | |||
| + | = Lubrication History = | ||
Details on github: [https://github.com/MakerSpaceLeiden/AbeneMill/tree/master/lubrication] | Details on github: [https://github.com/MakerSpaceLeiden/AbeneMill/tree/master/lubrication] | ||
Versie van 9 dec 2017 om 22:34
Abene VHF3 Metaalfrees machine
See github for documentation. [1]
Status
Not yet operational Unresolved issues are:
- . Mounting of pump
- . Filling of reservoir with the right mix
- . Z axis blocks at 80%.
To procure/find
- . Water soluble coolant (artikel 01345 at HBM) - minstens 2 liter bij 1:20 verdunning.
- . ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit (misschien HBM 02594)
- . Spanner for the easy-change ISO 40 taper/collet.
- . Small spanner for the taper bolt.
- . Set of collets for ISO 40.
Advies van Abene:
- Q8 Goya NT68 (gear oil) spindle and feed gear box)
- For everything else, Q8 Wagner NT68 (Slideway lube)
Lubrication History
Details on github: [2]
- . Main drive gearbox, spindle gearbox, drive gearbox on the left.
- . Replaced with Hykrol HLP ISO-VG 100 (ISO 100 hydraulic oil), 2017-11-19. 5L was about sufficient all 3 gearboxes.
- . Overarm bearing
- . Emptied and cleaned 2017-11-19. Not yet replaced.
- . Sideways
- . Emptied and cleaned 2017-11-12. Not yet replaced.
- . Kneejacking screw
- . Emptied and cleaned 2017-11-29. Replaced by ISO 46 hydraulic oi.l 2017-11-29.
- . Headstock and motor bearings.
- . Emptied and cleaned. 2017-11-29. Replaced by ISO 100 hydraulic oil. 2017-11-29.
