Project Deuropener v2.0: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 14: Regel 14:
  
 
Communication via MQTT
 
Communication via MQTT
 +
 +
==schematic & code==
 +
*[[Bestand:Nieuwemsldeur.pdf]]
 +
*[https://github.com/MakerSpaceLeiden/sacs code]

Versie van 18 sep 2017 om 14:23

Deur (door) opening system

This page is for communication around developing the new door opening system for MSL. After discussing with Hans, DW, Marcel and Alex a decision was made to go with the ethernet-wired setup (as opposed to ESP wireless). For this the following hardware is required:

  • Ethernet met PoE
  • DC voltage control circuit (for Arduino and for the switching circuit)
  • Arduino
  • RFID card reader
  • status LEDs (need to agree on meaning of colors and blinking), buzzer sound
  • actuation switching circuit
  • (option) current sensing loop to indicate machine usage status

Communication via MQTT

schematic & code