VOIP experiment: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Still to do)
(Setup)
 
Regel 11: Regel 11:
 
# POTS on port 1 - number: +31715690707, 071-5690707 of 5690707
 
# POTS on port 1 - number: +31715690707, 071-5690707 of 5690707
 
# Mangement interface op http://192.168.6.201/
 
# Mangement interface op http://192.168.6.201/
# 25 Hz, 60 volt dial
+
# Configure: 25 Hz, 90 volt, sinoid for ring signal (under Voice->Region)
  
 
Not yet working - pulse based dial out
 
Not yet working - pulse based dial out

Huidige versie van 22 apr 2025 om 23:27

PhoneSPA112 bridge

Setup

Setup for a simple VoIP experiment:

  1. Account with cheapconnect
  2. KYC authentication (for now via Dirk's company) to get a Leiden trunk number
  3. SPA112 configured with the trunk
  4. Password to Cisco SPA112 in the usual place
  5. POTS on port 1 - number: +31715690707, 071-5690707 of 5690707
  6. Mangement interface op http://192.168.6.201/
  7. Configure: 25 Hz, 90 volt, sinoid for ring signal (under Voice->Region)

Not yet working - pulse based dial out

Getting the phone to work

Connect B and EB (Extra Bel) -- thanks to HansS for the hint !

Still to do

  1. Move SPA into patch/data enclosure
  2. Find place for phone
  3. Find historic wall socket
  4. Run two-pair phone cable from SPA to wall socket (or use exacting cat5 cabling)
  5. Find one of those ancient loud bells to mount on the workshop side