Node Table saw: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Log)
Regel 15: Regel 15:
 
= Log =
 
= Log =
  
'''
+
    Wed Jan 22 19:45:22 CET 2020 ac/log/tablesaw tablesaw {
Wed Jan 22 19:45:22 CET 2020 ac/log/tablesaw tablesaw {"node":"tablesaw","machine":"tablesaw","maxMqtt":768,"id":"44d26ea4ae30","ip":"192.168.6.213","net":"UTP","mac":"30:AE:A4:6E:D2:47","beat":1579718723,"alive-uptime":539106,"approve":8,"deny":0,"requests":8,"cache_hit":8,"cache_miss":0,"mqtt_reconnects":1,"loop_rate":9372.537,"coreTemp":51.66667,"heap_free":200216,"rfid_scans":8,"rfid_misses":52,"state":"Waiting for card","powered_time":425830,"extract_time":121568,"running_time":60022,"idle_poweroff":1,"fan_poweroff":21,"bad_poweroff":0,"current":0.000175,"opto":"low","triac":0,"relay":0,"ota":true}
+
"node": "tablesaw",
'''
+
"machine": "tablesaw",
 +
"maxMqtt": 768,
 +
"id": "44d26ea4ae30",
 +
"ip": "192.168.6.213",
 +
"net": "UTP",
 +
"mac": "30:AE:A4:6E:D2:47",
 +
"beat": 1579718723,
 +
"alive-uptime": 539106,
 +
"approve": 8,
 +
"deny": 0,
 +
"requests": 8,
 +
"cache_hit": 8,
 +
"cache_miss": 0,
 +
"mqtt_reconnects": 1,
 +
"loop_rate": 9372.537,
 +
"coreTemp": 51.66667,
 +
"heap_free": 200216,
 +
"rfid_scans": 8,
 +
"rfid_misses": 52,
 +
"state": "Waiting for card",
 +
"powered_time": 425830,
 +
"extract_time": 121568,
 +
"running_time": 60022,
 +
"idle_poweroff": 1,
 +
"fan_poweroff": 21,
 +
"bad_poweroff": 0,
 +
"current": 0.000175,
 +
"opto": "low",
 +
"triac": 0,
 +
"relay": 0,
 +
"ota": true
 +
    }

Versie van 26 jan 2020 om 16:19

NodeTableSawOutside.jpeg

PoE powered Node on Ethernet voor de Circelzaag.


Werkt samen met de SafetyContactor; dus aan en uit zetten met de normale rode/groene knoppen.

OPTO1 wordt gebruikt om spanning via de SafetyContactor te detecteren; het relay onderbreekt de interlock kring van diezelfde SafetyContactor.

Electronics

Gebaseerd op een Powernode_1.1 bordje

Log

   Wed Jan 22 19:45:22 CET 2020	ac/log/tablesaw tablesaw {

"node": "tablesaw", "machine": "tablesaw", "maxMqtt": 768, "id": "44d26ea4ae30", "ip": "192.168.6.213", "net": "UTP", "mac": "30:AE:A4:6E:D2:47", "beat": 1579718723, "alive-uptime": 539106, "approve": 8, "deny": 0, "requests": 8, "cache_hit": 8, "cache_miss": 0, "mqtt_reconnects": 1, "loop_rate": 9372.537, "coreTemp": 51.66667, "heap_free": 200216, "rfid_scans": 8, "rfid_misses": 52, "state": "Waiting for card", "powered_time": 425830, "extract_time": 121568, "running_time": 60022, "idle_poweroff": 1, "fan_poweroff": 21, "bad_poweroff": 0, "current": 0.000175, "opto": "low", "triac": 0, "relay": 0, "ota": true

   }