Logo

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken

This page contains the current and previous logos of the makerspace in various file formats for use in projects and promotional materials.

The new logo of the MakerSpace Leiden is shown below. It is available in 3 different versions:

  • The 'standard' version to be used on light backgrounds. Avoid colored backgrounds if possible

Standard Logo

  • The 'minimal' version, aimed towards locations with limited space, such as a favicon. A white version with transparent cutout of the keys/wrenches is also available (click next to the red logo below)

Minimal Logo (aka favicon) Minimal Logo with transparent cutout

  • The white version, to maximize contrast on darker backgrounds to maximize contrast (logo is actually shown below but the page background is white ...)

White Logo

The font used is 'ITC Avant Garde Gothic LT Bold'.

Ask Valère if you have a specific use case of the logo that cannot be satisfied by any of the above.

Version for firmware

E.g. for the various PowerNode Whites and the Payment Terminal with TFT screens.

   const unsigned char msl_logo_32x32_width = 32;
   const unsigned char msl_logo_32x32_height = 32;
   const unsigned char msl_logo_32x32 [] PROGMEM = {
   	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
   	0x00, 0xe0, 0x00, 0x00, 0x00, 0x78, 0x00, 0xc0, 0x00, 0x3c, 0x01, 0xe0, 0x00, 0x3c, 0x03, 0xe0, 
   	0x08, 0x3c, 0x07, 0xc0, 0x0c, 0x3c, 0x0f, 0xc0, 0x0f, 0xfc, 0x1f, 0xe0, 0x0f, 0xfe, 0x3f, 0xe0, 
   	0x07, 0xff, 0x7f, 0x60, 0x03, 0xfe, 0xfe, 0x00, 0x00, 0x1d, 0xff, 0x00, 0x00, 0x0b, 0xe7, 0x00, 
   	0x00, 0x07, 0xd2, 0x00, 0x00, 0x0f, 0xb8, 0x00, 0x03, 0xff, 0x7f, 0xc0, 0x07, 0xfe, 0xff, 0xe0, 
   	0x07, 0xfc, 0x7f, 0xe0, 0x0e, 0x1c, 0x38, 0x70, 0x0e, 0x1c, 0x38, 0x70, 0x0e, 0x1c, 0x38, 0x70, 
   	0x0f, 0x1c, 0x38, 0x70, 0x07, 0xf8, 0x3f, 0xe0, 0x03, 0xf8, 0x1f, 0xe0, 0x01, 0xe0, 0x07, 0x80, 
   	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
   };

This was the previous logo of the makerspace. The logo was designed by Henry.

  • Typeface Arial-Bold
  • The colors are:
    • ff0000 Red
    • 0000ff Blue


MSL-logo-old.svg


  • The logo without its colors, only with vector lines:

MSL-logo-old-only-vector-lines.svg