Node Lights Out
Versie door DirkWillem (overleg | bijdragen) op 28 dec 2018 om 18:50
OLIMEX PoE gebaseerde node die kijkt naar de 3 AC netten van het licht.
Note: not yet operational - AC1 seems to give odd values.
Wiring and technical data
The 6 screw terminals are Optocoupler detect (2x3) of AC.
All 3 expect AC/230 volt. The RED led on the front is the 'AartLED'.
Code in [[1]]/
Current mac address is 3C:71:BF:10:62:A7 -- wired to the top patch panel, port 23. It is currently connected by a yellow cable to the top switch; port 23 (auto-negotiation, no further settings)
Opto electronics
Typical log
AC1 to AC3 are the OPTO couplers state; True is off (there is a pull up at work), False is AC voltage detected.
{ "node": "lights", "machine": "lights", "maxMqtt": 768, "id": "a46210bf713c", "ip": "192.168.3.173", "net": "UTP", "mac": "3C:71:BF:10:62:A7", "beat": 0, "approve": 0, "deny": 0, "requests": 0, "cache_hit": 0, "cache_miss": 0, "mqtt_reconnects": 1, "loop_rate": 11137.78, "coreTemp": 72.22222, "heap_free": 223272, "state": "Powered - no lights", "powered_time": 1195, "running_time": 0, "ota": true, "acstate1": true, "acstate2": true, "acstate3": true }