Safety Relay

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken

We use safety relays/magnetic on-off relays in many places; these prevent that a machine powers back on after a power loss.

It also prevents powering back on after someone pressed the emergency button.

And it ensures the power is turned off immediately after pressing the emergency button, the stop button, an overheat/overload situation or a lock-out situation. In some cases it is also integrated in the Access control system.

Most are a variation of the Large Stationary Grinder or the Cirkelzaagtafel SCM L'Invincible / Large tablesaw circuit. Or are based on a product such as: https://www.hydrauliek24.nl/motor-beveiligingsschakelaar-7-10-a:

magnetic on-off switch used on most 400VAC machines

Some of the small machines use a 4 or 5 pin `on-off' button such as https://www.amazon.de/-/en/Hefddehy-Waterproof-Magnetic-Button-220-240V/dp/B0BYNGHLJ5/ref=sr_1_10 or https://www.amazon.de/-/en/KEDU-KJD17-Flush-Mounted-Switch-Voltage/dp/B07956F8TN/ref=d_pd_day0_sccl_2_1/257-4034223-4086038

These are wired as thus:

Magnetic on-off switch