Node Wood Lathe

PoE node voor the woodlathe.

Use

When stationaly - led will flash briefly every few seconds. If it flashes faster - it is unhappy about something.

Swipe your card at the bottom. LED wil come on solid (or flash rapidly during check or error).

Operate the machine with the red/green on-off button on the right end / near the legs.

Press orange button once you are done to lock things. Note: the unit will refuse to power off while the machine is running. So first power off the machine with its own red/green button (press green). Then press the button on the node to `lock' it.

Log

 Thu Jan 23 13:55:07 CET 2020	ac/log/woodlathe woodlathe {
  "state" : "Powered - but idle",
  "heap_free" : 209620,
  "current" : 9.7e-05,
  "rfid_misses" : 4,
  "approve" : 1,
  "running_time" : 8,
  "rfid_scans" : 1,
  "bad_poweroff" : 0,
  "requests" : 1,
  "net" : "UTP",
  "id" : "e8d97ea4ae30",
  "cache_hit" : 1,
  "errors" : 1,
  "machine" : "woodlathe",
  "ip" : "192.168.6.207",
  "cache_miss" : 0,
  "deny" : 0,
  "mac" : "30:AE:A4:7E:D9:EB",
  "maxMqtt" : 768,
  "mqtt_reconnects" : 1,
  "loop_rate" : 7184.777,
  "manual_poweroff" : 0,
  "powered_time" : 277,
  "beat" : 1579784108,
  "coreTemp" : 55.55556,
  "node" : "woodlathe",
  "idle_poweroff" : 0,
  "interlock" : false
 }