Abene Metal Mill / Freesbank
Abene VHF3 Metaalfrees machine
See github for documentation. [1]
Status
Not yet operational Unresolved issues are:
- . Mounting of pump
- . Filling of reservoir with the right mix
- . Z axis blocks at 80%.
To procure/find
- . Water soluble coolant (artikel 01345 at HBM) - minstens 2 liter bij 1:20 verdunning.
- . ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit (misschien HBM 02594)
- . Spanner for the easy-change ISO 40 taper/collet.
- . Small spanner for the taper bolt.
- . Set of collets for ISO 40.
Advies van Abene:
- Q8 Goya NT68 (gear oil) spindle and feed gear box)
- For everything else, Q8 Wagner NT68 (Slideway lube)
Lubrication History
Details on github: [2]
- . Main drive gearbox, spindle gearbox, drive gearbox on the left.
- . Replaced with Hykrol HLP ISO-VG 100 (ISO 100 hydraulic oil), 2017-11-19. 5L was about sufficient all 3 gearboxes.
- . Overarm bearing
- . Emptied and cleaned 2017-11-19. Not yet replaced.
- . Sideways
- . Emptied and cleaned 2017-11-12. Replaced by sideway oil 68 - 2017-12-15.
- . Kneejacking screw
- . Emptied and cleaned 2017-11-29. Replaced by ISO 46 hydraulic oi.l 2017-11-29.
- . Headstock and motor bearings.
- . Emptied and cleaned. 2017-11-29. Replaced by ISO 100 hydraulic oil. 2017-11-29.
- . Coolant
- . Emptied and cleaned - not able to reach all parts. Replaced by 1:10 mix. 2017-12-15. Zie"http://www.oliehandel.nl/eurol/eurol-boorolie-a" voor details.