Zandstraalcabine Sand blast cabinet
Inhoud
Safety
Glass Bead Dust Inhalation Risk
The glass beads used for blasting are very small and break during the process, creating sharp fine dust that is harmful when inhaled.
- Always use respiratory protection, such as a face mask, during blasting, especially when removing the blasted object from the cabinet.
- Wear respiratory protection when removing used glass beads or replenishing with new ones.
- Place used glass beads in two plastic bags (one inside the other) for extra protection before disposing of them in the waste container.
Contamination Risk
When using the sandblasting cabinet, be aware that the sandblasting cabinet may contain contaminants like paint, chemicals, or rust from previous projects. If your object will come into contact with food, skin, or needs to be clean, make sure to thoroughly clean it after sandblasting.
Avoid directing the blast toward your fingers
The thick rubber gloves are not as durable as they appear, and it can be very painful if the abrasive breaks through them.
Gebruik
Zorg er voor dat:
- de grote perslucht compressor aan staat, want de zandstraalcabine heeft luchtdruk nodig
- De afzuiging aan staat
- De afzuigklep bij de zandstraler open staat (en op andere plaatsen dicht, anders verlies je onderdruk. Na gebruik weer sluiten!)
- De zandstraalcabine aan staat (knop aan de linker zijkant en de masterswitch aan de muur!)
Compressor
Afzuiger
Afzuigklep
zandstraalcabine
Voor meer informatie over glas zandstralen zie: Glas Zandstralen
Locatie
Ga naar de grote werkplaats. De zandstraal cabine staat meteen rechts; achterin de lashoek.
