Node Wood Lathe

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
De printervriendelijke versie wordt niet langer ondersteund en kan weergavefouten bevatten. Werk uw browserbladwijzers bij en gebruik de gewone afdrukfunctie van de browser.

PoE node voor the woodlathe.

Use

When stationaly - led will flash briefly every few seconds. If it flashes faster - it is unhappy about something.

Swipe your card at the bottom. LED wil come on solid (or flash rapidly during check or error).

Operate the machine with the red/green on-off button on the right end / near the legs.

Press orange button once you are done to lock things. Note: the unit will refuse to power off while the machine is running. So first power off the machine with its own red/green button (press green). Then press the button on the node to `lock' it.

Log

 Thu Jan 23 13:55:07 CET 2020	ac/log/woodlathe woodlathe {
  "state" : "Powered - but idle",
  "heap_free" : 209620,
  "current" : 9.7e-05,
  "rfid_misses" : 4,
  "approve" : 1,
  "running_time" : 8,
  "rfid_scans" : 1,
  "bad_poweroff" : 0,
  "requests" : 1,
  "net" : "UTP",
  "id" : "e8d97ea4ae30",
  "cache_hit" : 1,
  "errors" : 1,
  "machine" : "woodlathe",
  "ip" : "192.168.6.207",
  "cache_miss" : 0,
  "deny" : 0,
  "mac" : "30:AE:A4:7E:D9:EB",
  "maxMqtt" : 768,
  "mqtt_reconnects" : 1,
  "loop_rate" : 7184.777,
  "manual_poweroff" : 0,
  "powered_time" : 277,
  "beat" : 1579784108,
  "coreTemp" : 55.55556,
  "node" : "woodlathe",
  "idle_poweroff" : 0,
  "interlock" : false
 }