Node Tussendeur

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken

PoE powered Node on Ethernet voor de tussendeur in de hal.

Current IP address: 192.168.6.30 / 30:AE:A4:13:E9:3C and connected to port 2 of the patch panel

Has debugging on telnet, MQTT, syslog and a web interface: http://192.168.6.30:

TussendeurNode-log.png

Electronics

Mosfet om een Solenoide in de deur aan te sturen. Deze draait op de 48V van de PoE.

Runs on the PowerNodeV11 board. It has a separate splitter to extract a higher voltage/current (12V) for the solenoid.

History

Rebuild sometime 2016 and upgraded early 2018 with the 1.1 batch (yellow boards)

Firmware last updated 2022/2/19 with https://github.com/MakerSpaceLeiden/AccesSystem/releases/tag/cache-fix-2022-02-19-1.00 - to fix caching and a range of errors found by Duco when using the Arduino rather than the VisualStudio setup.