VOIP experiment

Setup

Setup for a simple VoIP experiment:

1. Account with cheapconnect
2. KYC authentication (for now via Dirk's company) to get a Leiden trunk number
3. SPA112 configured with the trunk
4. Password to Cisco SPA112 in the usual place
5. POTS on port 1 - number: +31715690707, 071-5690707 of 5690707
6. Mangement interface op http://192.168.6.201/
7. Configure: 25 Hz, 90 volt, sinoid for ring signal (under Voice->Region)

Not yet working - pulse based dial out

Getting the phone to work

Connect B and EB (Extra Bel) -- thanks to HansS for the hint !

Still to do

1. Move SPA into patch/data enclosure
2. Find place for phone
3. Find historic wall socket
4. Run two-pair phone cable from SPA to wall socket (or use exacting cat5 cabling)
5. Find one of those ancient loud bells to mount on the workshop side