Server setup

The front end server (mid 2018) runs on Linux; in a `cloud' hosted environment.

Below documents the initial setup of the base machine; followed by the setup for each of the modules.

The final section shows the monthly and annual maintenance cycles.

Setup and rudimentary hardening

• Get the machine in a known state and install sudo (so we can disable root; and comply with 'named accounts' only policies):

apt update
apt upgrade
apt install sudo certbot certbot-apache

• enable ufw and allow the usual ports in IPv4 and IPv6

 for port in 22 25 53 80 443
 do
   ufw allow  $port
 done
 # do this last so we're not kicked out.
 ufw enable

• create named accounts for each of the admins (you need to get everyones their public SSH key):

 adduser \
  --system \
  --shell /bin/bash \
  --gecos 'Dirk-Willem van Gulik' \
  --group \
  --ingroup admin \
  --disabled-password \
  dirkx

• Add an ssh key for each of these users

• check that you can log in; and sudo with at least one of them.

• Block root login and passwords in /etc/ssh/sshd.conf:

 PermitRootLogin no
 PasswordAuthentication no
 ChallengeResponseAuthentication no

Note: if you did not check the sudo/login of an admin user - they you are about to lock yourself out upon reboot.

• Edit /etc/sysctl.conf to block spoofing, ICMP broadcast, source-packet routing, send redirect, SYN attacks, Martians and ICM redirects.

• Prevent IP spoofing for DNS by replacing multi on to nospoof on in /etc/hosts.conf

• Securing shared memory.

 echo tmpfs /run/shm tmpfs defaults,noexec,nosuid 0 0 >> /etc/fstab

• Reboot.

Setup of the basic website

We need to first set up a very basic website; in order to be able to fetch the required SSL certificates.

• Install apache and certbot and the integration glue between the two:

sudo apt install apache2 certbot python-certbot-apache

• Request the needed certs:

sudo certbot --apache -d makerspaceleiden.nl -d www.makerspaceleiden.nl -d wiki.makerspaceleiden.nl

• Ensure they get renewed; and that the admins are emailed when this goes wrong:

Setup of the MTA

Log in as one of the admins.

• Make sure /etc/mailname is set to makerspaceleiden.nl

• Install postfix and basic mail stuff:

 sudo apt install postfix mailtools postgrey mavisd-new spamassassin clamav-daemon libnet-dns-perl libmail-spf-perl pyzor razor  arj bzip2 cabextract cpio file gzip  nomarch pax rar unrar unzip zip

• Edit the /etc/aliases file to redirect the mail of 'root' and update:

 sudo vi /etc/aliases
 sudo newaliases

• Edit the certs in /etc/postfix/main.cf

 smtpd_tls_cert_file=/etc/letsencrypt/live/makerspaceleiden.nl/fullchain.pem
 smtpd_tls_key_file=/etc/letsencrypt/live/makerspaceleiden.nl/privkey.pem

• Give the virus/spam scanner mutual access:

 sudo adduser clamav amavis
 sudo adduser amavis clamav

• As the amavis user; razor-admin -create and razor-admin -register if needed.

• Edit /etc/amavis/conf.d/15-content_filter_mode to activate the filters and restart:

 sudo /etc/init.d/amavis restart

• The whitelist for postgray contains a number of entries for the various deur logging systems:

... to do ...

Setup of WordPress

• Install enough of the LAMP stack to get going:

 sudo apt install apache2 mysql-server php libapache2-mod-php php-mysql wordpress-theme-twentyseventeen wordpress

• Secure your mysql install:

 sudo mysql_secure_installation

• Configure apache:

  cat <<EOM > /etc/apache2/sites-available/wordpress.conf
 <VirtualHost *:80>
     ServerAdmin noc@makerspaceleiden.nl
  
     ServerName        makerspaceleiden.nl
     ServerAlias       www.makerspaceleiden.nl
  
     DocumentRoot /var/www/html
     ErrorLog ${APACHE_LOG_DIR}/error.log
     CustomLog ${APACHE_LOG_DIR}/access.log combined
  
     RewriteEngine On
     RewriteCond %{HTTPS} off
     RewriteRule (.*) https://%{SERVER_NAME}/$1 [R,L]
 </VirtualHost>
 
 Listen *443
 <VirtualHost *:443>
     ServerAdmin noc@makerspaceleiden.nl
     ServerName        makerspaceleiden.nl
     ServerAlias       www.makerspaceleiden.nl
  
     SSLCertificateFile  /etc/letsencrypt/live/makerspaceleiden.nl/fullchain.pem
     SSLCertificateKeyFile /etc/letsencrypt/live/makerspaceleiden.nl/privkey.pem
 
     SSLProtocol all -SSLv2 -SSLv3
     SSLHonorCipherOrder On
     SSLCipherSuite EECDH+AES:EDH+AES:-SHA1:EECDH+RC4:EDH+RC4:RC4-SHA:EECDH+AES256:EDH+AES256:AES256-SHA:!aNULL:!eNULL:!EXP:!LOW:!MD5
 
     DocumentRoot /usr/share/wordpress
 
     ErrorLog ${APACHE_LOG_DIR}/error.log
     CustomLog ${APACHE_LOG_DIR}/access.log combined
  
     <Directory /usr/share/wordpress>
           Options FollowSymLinks
           AllowOverride Limit Options FileInfo
           DirectoryIndex index.php
           Order allow,deny
           Allow from all
     </Directory>
 
     <Directory /usr/share/wordpress/wp-content>
           Options FollowSymLinks
           Order allow,deny
           Allow from all
       </Directory>
        
  </VirtualHost>

  EOM

• Create a database and a config file (changing yourpasswordhere123):

 cat <<EOM |  sudo mysql --defaults-extra-file=/etc/mysql/debian.cnf
 CREATE DATABASE wordpress;
 GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP,ALTER
 ON wordpress.*
 TO wordpress@localhost
 IDENTIFIED BY 'yourpasswordhere123';
 FLUSH PRIVILEGES;
 EOM

 cat <<EOM > /etc/wordpress/config-localhost.php
 <?php
 define('DB_NAME', 'wordpress');
 define('DB_USER', 'wordpress');
 define('DB_PASSWORD', 'yourpasswordhere123');
 define('DB_HOST', 'localhost');
 define('WP_CONTENT_DIR', '/usr/share/wordpress/wp-content');
 define('FS_METHOD', 'direct');
 ?>

• Secure this file so that only the webserver can see this password.

    sudo chown root:www-data /etc/wordpress/config-localhost.php
    sudo chmod o-rwx,g-wx /etc/wordpress/config-localhost.php

• Enable, kill default and restart:

  sudo a2ensite wordpress
  sudo a2dissite 000-default 
  sudo systemctl reload apache2

• Check that it all works by visiting

  httpp://makerspaceleiden.nl/install.php

• If you want to be able to update in place - be sure to have the wordpress content directory `www-data' owned.

Setup of Media Wiki

• Install the base packages

 apt install mediawiki imagemagick php-apcu php-intl

• Create the database:

cat <<EOM |  sudo mysql --defaults-extra-file=/etc/mysql/debian.cnf
CREATE DATABASE mediawiki;
GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP,ALTER,INDEX
ON mediawiki.*
TO mediawiki@localhost
IDENTIFIED BY 'yourpasswordhere12443';
FLUSH PRIVILEGES;
EOM

• Restart apache.

• Go to the wiki - and use the config values from above DB setup.,

• Follow the instructions and copy the generated LocalSettings.php to the specified location.

• Add the various users.

making a backup and importing it

• Backup script:

 #!/bin/sh
 set -e
 set -x
 D=`date +%Y%m%d%H%M%S`
 mkdir media-wiki-backup.$D
 
 cd media-wiki-backup.$D
 
 mysqldump --user=wikiuser --password="XXXX" wikidb > file.sql
 mysqldump --user=wikiuser --password="XXXX" wikidb --xml > file.xml
 
 cp -r /usr/local/www/mediawiki/images .
 cp /usr/local/www/mediawiki/LocalSettings.php .
 
 cd ..
 tar zcf media-wiki-backup-$D.tgz media-wiki-backup.$D
 rm -rf  media-wiki-backup.$D

• Dump the full wiki:

    jexec mls  ... script ..

• Copy the file across.

• Import it on the other machine

  #!/bin/sh
  set -ex
  
  if ! test -f latest.tgz; then
   		echo no last dump.
   		exit 1
   fi
   mkdir tmp.$$
   cd tmp.$$
   tar zxf ../latest.tgz
   (
   cd *
   
   rm -rf /var/lib/mediawiki/cache /var/lib/mediawiki/images
   
   mkdir import /var/lib/mediawiki/cache /var/lib/mediawiki/images
   cp -r images/? /var/lib/mediawiki/images
   chown -R www-data:www-data /var/lib/mediawiki/images  /var/lib/mediawiki/cache
   
   cat <<EOM |  sudo mysql --defaults-extra-file=/etc/mysql/debian.cnf
   DROP DATABASE mediawiki;
   CREATE DATABASE mediawiki;
   GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP,ALTER,INDEX
   ON mediawiki.*
   TO mediawiki@localhost
   IDENTIFIED BY 'XXXX';
   FLUSH PRIVILEGES;
   EOM
  
   cat file.sql | sudo mysql --defaults-extra-file=/etc/mysql/debian.cnf mediawiki
  
   sudo -u www-data /usr/share/mediawiki/maintenance/update.php
   sudo -u www-data php  /usr/share/mediawiki/maintenance/cleanupImages.php
   sudo -u www-data php /usr/share/mediawiki/maintenance/rebuildall.php 
   sudo -u www-data php /usr/share/mediawiki/maintenance/rebuildImages.php 
   
   ) || exit 1
   rm -rf tmp.$$
   exit $?

Virus scan

There is a malware/virus scan set up across the uploads; with automatic refresh of the signature DBs:

... todo