Server setup
The front end server (mid 2018) runs on Linux; in a `cloud' hosted environment.
Below documents the initial setup of the base machine; followed by the setup for each of the modules.
The final section shows the monthly and annual maintenance cycles.
Inhoud
Setup and rudimentary hardening
- Get the machine in a known state and install sudo (so we can disable root; and comply with 'named accounts' only policies):
apt update apt upgrade apt install sudo certbot certbot-apache moreutils
- enable ufw and allow the usual ports in IPv4 and IPv6
for port in 22 25 53 80 443 do ufw allow $port done # do this last so we're not kicked out. ufw enable
- create named accounts for each of the admins (you need to get everyones their public SSH key):
adduser \ --system \ --shell /bin/bash \ --gecos 'Dirk-Willem van Gulik' \ --group \ --ingroup admin \ --disabled-password \ dirkx
- Add an ssh key for each of these users
- check that you can log in; and sudo with at least one of them.
- Block root login and passwords in /etc/ssh/sshd.conf:
PermitRootLogin no PasswordAuthentication no ChallengeResponseAuthentication no
Note: if you did not check the sudo/login of an admin user - they you are about to lock yourself out upon reboot.
- Edit /etc/sysctl.conf to block spoofing, ICMP broadcast, source-packet routing, send redirect, SYN attacks, Martians and ICM redirects.
- Prevent IP spoofing for DNS by replacing multi on to nospoof on in /etc/hosts.conf
- Securing shared memory.
echo tmpfs /run/shm tmpfs defaults,noexec,nosuid 0 0 >> /etc/fstab
- Make sure we trap all crontab outputs systemctl edit cron.service:
[Service] Environment="MAILTO=noc@makerspaceleiden.nl"
- Reboot.
Setup of the basic website
We need to first set up a very basic website; in order to be able to fetch the required SSL certificates.
- Install apache and certbot and the integration glue between the two:
sudo apt install apache2 certbot python-certbot-apache
- Request the needed certs:
sudo certbot --apache -d makerspaceleiden.nl -d www.makerspaceleiden.nl -d wiki.makerspaceleiden.nl
- Ensure they get renewed; and that the admins are emailed when this goes wrong:
Setup of the MTA
Log in as one of the admins.
- Make sure /etc/mailname is set to makerspaceleiden.nl
- Install postfix and basic mail stuff:
sudo apt install postfix mailtools postgrey mavisd-new spamassassin clamav-daemon libnet-dns-perl libmail-spf-perl pyzor razor arj bzip2 cabextract cpio file gzip nomarch pax rar unrar unzip zip
- Edit the /etc/aliases file to redirect the mail of 'root' and update:
sudo vi /etc/aliases sudo newaliases
- Edit the certs in /etc/postfix/main.cf
smtpd_tls_cert_file=/etc/letsencrypt/live/makerspaceleiden.nl/fullchain.pem smtpd_tls_key_file=/etc/letsencrypt/live/makerspaceleiden.nl/privkey.pem
- Make sure there is a postfix restarted in /etc/letsencrypt/renewal-hooks/post. As otherwise postfix won't see your fresh certs. A shell script with just something like below should do the trick:
#!/bin/sh service postfix restart
- Give the virus/spam scanner mutual access:
sudo adduser clamav amavis sudo adduser amavis clamav
- As the amavis user; razor-admin -create and razor-admin -register if needed.
- Edit /etc/amavis/conf.d/15-content_filter_mode to activate the filters and restart:
sudo /etc/init.d/amavis restart
- The whitelist for postgray contains a number of entries for the various deur logging systems:
... to do ...
Setup of WordPress
- Install enough of the LAMP stack to get going:
sudo apt install apache2 mysql-server php libapache2-mod-php php-mysql wordpress-theme-twentyseventeen wordpress
- Secure your mysql install:
sudo mysql_secure_installation
- Configure apache:
cat <<EOM > /etc/apache2/sites-available/wordpress.conf
<VirtualHost *:80>
ServerAdmin noc@makerspaceleiden.nl
ServerName makerspaceleiden.nl
ServerAlias www.makerspaceleiden.nl
DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
RewriteEngine On
RewriteCond %{HTTPS} off
RewriteRule (.*) https://%{SERVER_NAME}/$1 [R,L]
</VirtualHost>
Listen *443
<VirtualHost *:443>
ServerAdmin noc@makerspaceleiden.nl
ServerName makerspaceleiden.nl
ServerAlias www.makerspaceleiden.nl
SSLCertificateFile /etc/letsencrypt/live/makerspaceleiden.nl/fullchain.pem
SSLCertificateKeyFile /etc/letsencrypt/live/makerspaceleiden.nl/privkey.pem
SSLProtocol all -SSLv2 -SSLv3
SSLHonorCipherOrder On
SSLCipherSuite EECDH+AES:EDH+AES:-SHA1:EECDH+RC4:EDH+RC4:RC4-SHA:EECDH+AES256:EDH+AES256:AES256-SHA:!aNULL:!eNULL:!EXP:!LOW:!MD5
DocumentRoot /usr/share/wordpress
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
<Directory /usr/share/wordpress>
Options FollowSymLinks
AllowOverride Limit Options FileInfo
DirectoryIndex index.php
Order allow,deny
Allow from all
</Directory>
<Directory /usr/share/wordpress/wp-content>
Options FollowSymLinks
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
EOM
- Create a database and a config file (changing yourpasswordhere123):
cat <<EOM | sudo mysql --defaults-extra-file=/etc/mysql/debian.cnf CREATE DATABASE wordpress; GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP,ALTER ON wordpress.* TO wordpress@localhost IDENTIFIED BY 'yourpasswordhere123'; FLUSH PRIVILEGES; EOM
cat <<EOM > /etc/wordpress/config-localhost.php
<?php
define('DB_NAME', 'wordpress');
define('DB_USER', 'wordpress');
define('DB_PASSWORD', 'yourpasswordhere123');
define('DB_HOST', 'localhost');
define('WP_CONTENT_DIR', '/usr/share/wordpress/wp-content');
define('FS_METHOD', 'direct');
?>
- Secure this file so that only the webserver can see this password.
sudo chown root:www-data /etc/wordpress/config-localhost.php
sudo chmod o-rwx,g-wx /etc/wordpress/config-localhost.php
- Enable, kill default and restart:
sudo a2ensite wordpress sudo a2dissite 000-default sudo systemctl reload apache2
- Check that it all works by visiting
httpp://makerspaceleiden.nl/install.php
- If you want to be able to update in place - be sure to have the wordpress content directory `www-data' owned.
Updaten van Word press
Zie WordpressUpdate
Setup of Media Wiki
- Install the base packages
apt install mediawiki imagemagick php-apcu php-intl
- Create the database:
cat <<EOM | sudo mysql --defaults-extra-file=/etc/mysql/debian.cnf CREATE DATABASE mediawiki; GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP,ALTER,INDEX ON mediawiki.* TO mediawiki@localhost IDENTIFIED BY 'yourpasswordhere12443'; FLUSH PRIVILEGES; EOM
- Restart apache.
- Go to the wiki - and use the config values from above DB setup.,
- Follow the instructions and copy the generated LocalSettings.php to the specified location.
- Add the various users.
making a backup and importing it
- Backup script:
#!/bin/sh set -e set -x D=`date +%Y%m%d%H%M%S` mkdir media-wiki-backup.$D cd media-wiki-backup.$D mysqldump --user=wikiuser --password="XXXX" wikidb > file.sql mysqldump --user=wikiuser --password="XXXX" wikidb --xml > file.xml cp -r /usr/local/www/mediawiki/images . cp /usr/local/www/mediawiki/LocalSettings.php . cd .. tar zcf media-wiki-backup-$D.tgz media-wiki-backup.$D rm -rf media-wiki-backup.$D
- Dump the full wiki:
jexec mls ... script ..
- Copy the file across.
- Import it on the other machine
#!/bin/sh set -ex if ! test -f latest.tgz; then echo no last dump. exit 1 fi mkdir tmp.$$ cd tmp.$$ tar zxf ../latest.tgz ( cd * rm -rf /var/lib/mediawiki/cache /var/lib/mediawiki/images mkdir import /var/lib/mediawiki/cache /var/lib/mediawiki/images cp -r images/? /var/lib/mediawiki/images chown -R www-data:www-data /var/lib/mediawiki/images /var/lib/mediawiki/cache cat <<EOM | sudo mysql --defaults-extra-file=/etc/mysql/debian.cnf DROP DATABASE mediawiki; CREATE DATABASE mediawiki; GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP,ALTER,INDEX ON mediawiki.* TO mediawiki@localhost IDENTIFIED BY 'XXXX'; FLUSH PRIVILEGES; EOM cat file.sql | sudo mysql --defaults-extra-file=/etc/mysql/debian.cnf mediawiki sudo -u www-data /usr/share/mediawiki/maintenance/update.php sudo -u www-data php /usr/share/mediawiki/maintenance/cleanupImages.php sudo -u www-data php /usr/share/mediawiki/maintenance/rebuildall.php sudo -u www-data php /usr/share/mediawiki/maintenance/rebuildImages.php ) || exit 1 rm -rf tmp.$$ exit $?
Monthly Reporting of deelnemers count
The provider has set up a crontab (through their support desk, manual action) that emails a uu-encoded gzipped lists of subscribers to all list owners.
- The user 'listreporter' has been created as an alias in /etc/aliases
listreporter: |/etc/mailman/listreporter.sh
- and is activated with newaliases.
This is wired up to a swapping script (requiring apt install moretools) and a script that is somewhat paranoid and parses/unpacks the email:
#!/bin/sh
set -e
umask 077
test -x /etc/mailman/listreporter.pl || exit 0
TMPDIR=${TMPDIR:-/tmp}
TMPDIR=${TMPDIR}/mailmanlistreporter.$$
(
mkdir $TMPDIR
cd $TMPDIR
# limit sizeto prevent naughtyness
dd bs=1k count=32 -out=in.msg
/usr/bin/perl /etc/mailman/listreporter.pl
) 2>&1 | ifne mail -s "Fault with the list reporter." noc@makerspaceleiden.nl
rm -rf "${TMPDIR}"
exit 0
The somewhat unusual ifne is from moretools and ensures that mail only runs if there is actual stdin text; so you do not get empty emails if all is well. This wrapper then wired to the script sending out the actual email:
#!/usr/bin/perl
# use strict;
use IO::CaptureOutput qw/capture_exec/;
umask(077);
open(STDIN,"in.msg") or die "Could not open msg file: $!\n";
my $list;
my $subject;
while(<STDIN>) {
last if m/^\s*$/;
$subject = $1 if m/^Subject\s*:\s*(.*)$/;
};
close(STDIN);
open STDIN, '</dev/null'; # Prevent warnings deep down in IO capture.
$list = $1 if $subject =~ m/List subscriber file:\s*(\S+)/;
# exit 0 unless $list;
die "Not the right subject <$subject>\n" unless $list;
die "Not a list I manage." unless $list eq 'deelnemers';
my ($stdout, $stderr, $success, $exit_code) = capture_exec("munpack","-q","in.msg");
die "Unpacking failed: $!\n" unless $exit_code == 0;
my $d = ;
foreach my $f (<subscribers.$list.*.gz>) {
next unless $f =~ m/subscribers.$list.([0-9\-]+).txt.gz/;
$d = $1;
system("cat '$f' | gunzip -c | dd bs=1k count=32 of=list.txt") == 0
or die "Could not unpack $f\n";
open(FH,'list.txt') or die "Could not open subscriber list";
my @list = ();
while(<FH>) {
chomp;
s/\s*#.*//;
s/\P{IsPrint}//g;
next if m/^\s*$/;
push @list, $_;
};
my $count= @list;
open(FH,"| mail -s 'Makerspace Leiden, $count $list on $d' -aFrom:hetbestuur\@makerspaceleiden.nl $list\@makerspaceleiden.nl")
or die "Cannot open pipe.\n";
print FH <<"EOM";
Hello All,
We have currently $count makers united, listed below:
Your can edit your own information here:
https://mailman.makerspaceleiden.nl/mailman/options/deelnemers
and this is also where you can switch to a digtest (just one big message/day)
or see the archive of historic messages.
EOM
print FH join("\n", @list);
print FH "\n-- \nStiching Makerspace Leiden / hetbestuur\@makerspaceleiden.nl\n\n";
close(FH);
exit(0);
}
this is then matched by sufficient permission to allow this post to go through moderation unchecked. We should get an email from the hoster on the first of every month.
MQTT Monitoring
A simple perl script listens to the MQTT bus; and flags up any node that has not reported in in a while.
#!/usr/bin/perl
use strict;
use Email::MIME;
use Email::Sender::Simple qw(sendmail);
$|++;
my $TO = 'deelnemers@makerspaceleiden.nl';
my $reporting_period = 600;
# The XDG_CONFIG_HOME is to prevent a warning about the Euid not having a home dir.
open(STDIN,"XDG_CONFIG_HOME=/tmp /usr/bin/mosquitto_sub -v -h space.makerspaceleiden.nl -t 'log/#' |") or die $@;
# We rotate the logs - as to be able to compress and retire them; thus preventing a full
# disk. We could also modify this - and rely on systemd to do such for us.
#
# We use a sub-directory of 'log' as to allow us to be ran as `nobody'. That is a bit
# safer, especially as we get 'data from the raw internet'
#
open(STDOUT,"|/usr/bin/rotatelogs -lf /var/log/mqtt/doorlog.%Y.%m.%d 86400") or die $@;
my %lastseen = ();
my %reported = ();
# Take a list of items; and return them with a 'and' between the one but last
# and last one. Just to make things look a bit nicer during reporting.
#
sub nice_join {
return "none" if !@_;
my $last = pop;
return $last if !@_;
return join(', ', @_) . " and $last";
}
$SIG{ALRM} = sub {
my @lost = ();
map {
push @lost, $_
if time() - $lastseen{ $_ } > $reporting_period *2;
} keys %lastseen;
if (@lost) {
my @nope = ();
map {
if ($reported{ $_ } ++ > 3) {
delete $reported{ $_ };
delete $lastseen{ $_ };
push @nope, $_;
};
} @lost;
my $subject = sprintf("The connection%s to doornode%s %s %s down.",
(@lost > 1) ? "s" : "",
(@lost > 1) ? "s" : "",
nice_join(@lost),
(@lost > 1) ? "are" : "is"
);
my $ps = ;
$ps = "PS: I won't be reporting on ".nice_join(@nope)." any more - down too long.\n"
if (@nope);
my $message = Email::MIME->create(
header_str => [
From => 'Monitoring MSL <noc@makerspaceleiden.nl>',
To => $TO,
Subject => $subject
],
attributes => {
encoding => 'quoted-printable',
charset => 'ISO-8859-1',
},
body_str => "$subject If you are at the makerspace - please be so kind run a reset.\n".
"\n".
"See the table at:\n".
"\n".
" https://wiki.makerspaceleiden.nl/mediawiki/index.php/NetworkSetup2018\n".
"\n".
"for the right port/cable to unseat for 5 seconds and plug back in. That should ".
"fix it. If you do so - let the mailing list know.\n".
"\n".
"As the doornodes remember recent keys - you may still be able to open the door, ".
"especially if you entered in the last week or so. But then again - perhaps not.\n".
"\n".
"Alternatively Aart, Hans and Dirk have physical spare keys. Dirk's key can be ".
"picked up during officehours at the janvossensteeg.\n".
"\n".
"Thanks !\n\n$ps\n"
);
sendmail($message);
};
alarm $reporting_period;
};
alarm $reporting_period;
while(<STDIN>) {
# We're on a raw bus - so do a modicum of filtering.
#
s/[^[:ascii:]]//g; print;
next unless m/\[(\S+?)\]/;
$lastseen{$1} = time();
}
die "Lost MQTT connection.\n";
This script is tarted/managed by a trivial startup file.
# /etc/systemd/system/mslmon.service [Unit] Description=MSL Door node montitoring on MQTT After=network.target
[Service] Type=simple User=nobody Group=nogroup WorkingDirectory=/tmp ExecStart=/home/dirkx/check-nodes.pl Restart=on-failure # or always, on-abort, etc
[Install] WantedBy=multi-user.target
Manage with the usual systemd commands such as
$ systemctl status mslmon.service
● mslmon.service - MSL Door node montitoring on MQTT
Loaded: loaded (/etc/systemd/system/mslmon.service; enabled; vendor preset: enabled)
Active: active (running) since Mon 2018-07-23 17:03:46 CEST; 8min ago
Main PID: 31903 (check-nodes.pl)
Tasks: 4 (limit: 4583)
CGroup: /system.slice/mslmon.service
├─31903 /usr/bin/perl /home/dirkx/check-nodes.pl
├─31914 sh -c /usr/bin/mosquitto_sub -v -h space.makerspaceleiden.nl -t 'log/#'
├─31918 /usr/bin/rotatelogs -lf /var/log/mqtt/doorlog.%Y.%m.%d 86400
└─31919 /usr/bin/mosquitto_sub -v -h space.makerspaceleiden.nl -t log/#
And check the logs with
$ sudo journalctl -u mslmon.service -- Logs begin at Sat 2018-06-23 13:19:36 CEST, end at Mon 2018-07-23 17:13:52 CEST. -- Jul 23 17:03:46 makerspaceleiden.nl systemd[1]: Started MSL Door node montitoring on MQTT.
Finally - there is a crontab that purges things after 90 days:
# Retain only the last 90 days. 4 4 * * * root test -d /var/log/mqtt && ( ls /var/log/mqtt/doorlog.* | sort -n | tail +90 | while read f; do rm "$f"; done )
Virus scan
There is a malware/virus scan set up across the uploads; with automatic refresh of the signature DBs:
... todo
