SnijOlie BoorOlie Cutting Oil
Inhoud
Boorolie Snijolie cuttingoil
Er zijn 3 stoorten sniijolie; algemene (voor alle metalen, inclusief aluminium), één speciale voor moeilijk aluminium) en één type voor met name gereedschapstaal of moeilijke/diepe gaten, spiebanen snijden en soorgelijk.
TLDR; Use the green OIL
TLDR: Gebruik de groene Olie.
Supplies and refilling
Er staat een grote fles groene olie om bij te vullen in de metaal kast.
This needs to be done about once every 2-3 months:
- Refill the green bottle from the green big supply flask.
Usually needed:
- Refill the big (white liquid) 1L squeeze bottle with 1:20 water diluted cutting oil (milk)
Sometimes needed:
- Refill the 2 small jars with the brushes with cutting oil.
- Refill, if needed, the sideway oil in the red can.
The cutting oil (snij olie) is in a grey 5L canister in the gray cupboard. The sideway oil (leibaan olie) is also in a grey-ish 5L container.
Snijolie voor Slijpen
ULTRACUT 370 Plus. General purpose, semi-synthetic cutting and grinding fluid
• Multipurpose cutting and grinding fluid. • Compatible with both hard and soft water. • High dilutions providing low in sump costs. • Suitable for use with most materials. • Excellent residual corrosion protection. • Inherently resistant to degradation. • Tolerant to tramp oil. • Low foaming. • Pleasant and safe to use.
use
Use it diluted 1:50 for the Vlakslijpmachine / Surface Grinder - mix the oil with the water while stirring well (see below datasheet).
datasheet
MDS / Safetsheet
